N9LOY-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N9LOY-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1761614587	0.05 Rx Erlang	0.02 Tx Erlang	36 count/10m	0 count/10m	12 count/10m
1761613387	0.05 Rx Erlang	0.02 Tx Erlang	33 count/10m	0 count/10m	14 count/10m
1761612187	0.03 Rx Erlang	0.02 Tx Erlang	27 count/10m	0 count/10m	14 count/10m
1761610987	0.04 Rx Erlang	0.02 Tx Erlang	28 count/10m	0 count/10m	12 count/10m
1761609787	0.04 Rx Erlang	0.01 Tx Erlang	36 count/10m	0 count/10m	12 count/10m
1761608591	0.05 Rx Erlang	0.02 Tx Erlang	48 count/10m	0 count/10m	16 count/10m
1761607387	0.06 Rx Erlang	0.02 Tx Erlang	49 count/10m	0 count/10m	17 count/10m
1761606187	0.08 Rx Erlang	0.02 Tx Erlang	68 count/10m	1 count/10m	18 count/10m
1761604987	0.07 Rx Erlang	0.02 Tx Erlang	61 count/10m	0 count/10m	21 count/10m
1761603787	0.06 Rx Erlang	0.02 Tx Erlang	49 count/10m	0 count/10m	16 count/10m
1761602587	0.04 Rx Erlang	0.01 Tx Erlang	35 count/10m	0 count/10m	11 count/10m
1761601387	0.06 Rx Erlang	0.02 Tx Erlang	48 count/10m	0 count/10m	14 count/10m
1761600187	0.05 Rx Erlang	0.01 Tx Erlang	39 count/10m	0 count/10m	11 count/10m
1761598987	0.05 Rx Erlang	0.01 Tx Erlang	39 count/10m	0 count/10m	9 count/10m
1761597787	0.04 Rx Erlang	0.01 Tx Erlang	36 count/10m	0 count/10m	11 count/10m
1761596587	0.04 Rx Erlang	0.01 Tx Erlang	37 count/10m	0 count/10m	10 count/10m
1761595387	0.05 Rx Erlang	0.02 Tx Erlang	44 count/10m	0 count/10m	12 count/10m
1761594187	0.06 Rx Erlang	0.02 Tx Erlang	46 count/10m	0 count/10m	16 count/10m
1761592987	0.05 Rx Erlang	0.02 Tx Erlang	40 count/10m	0 count/10m	12 count/10m
1761591787	0.07 Rx Erlang	0.02 Tx Erlang	52 count/10m	0 count/10m	15 count/10m
1761590587	0.07 Rx Erlang	0.02 Tx Erlang	61 count/10m	0 count/10m	20 count/10m
1761589387	0.05 Rx Erlang	0.01 Tx Erlang	38 count/10m	0 count/10m	12 count/10m
1761588187	0.05 Rx Erlang	0.01 Tx Erlang	38 count/10m	0 count/10m	9 count/10m
1761586987	0.05 Rx Erlang	0.01 Tx Erlang	45 count/10m	0 count/10m	11 count/10m
1761585787	0.06 Rx Erlang	0.01 Tx Erlang	44 count/10m	0 count/10m	10 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)