N9PBD-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N9PBD-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx10m*	Dg1h*	Eff1h*	Temp*
1761496324	14.1 Volt	7 Pkt	20 Pkt	38 Pcnt	-64 C
1761492720	14.1 Volt	8 Pkt	30 Pkt	39 Pcnt	-64 C
1761489117	14.1 Volt	13 Pkt	40 Pkt	38 Pcnt	-64 C
1761485513	14.1 Volt	17 Pkt	50 Pkt	52 Pcnt	-64 C
1761481911	14.1 Volt	12 Pkt	50 Pkt	47 Pcnt	-64 C
1761474703	14.1 Volt	13 Pkt	50 Pkt	41 Pcnt	-64 C
1761471102	14.1 Volt	12 Pkt	40 Pkt	38 Pcnt	-64 C
1761467496	14.1 Volt	16 Pkt	60 Pkt	48 Pcnt	-64 C
1761463893	14.1 Volt	12 Pkt	40 Pkt	40 Pcnt	-64 C
1761460289	14.1 Volt	16 Pkt	40 Pkt	45 Pcnt	-64 C
1761456687	13.8 Volt	21 Pkt	60 Pkt	57 Pcnt	-64 C
1761453083	13.65 Volt	22 Pkt	70 Pkt	59 Pcnt	-64 C
1761449481	14.1 Volt	22 Pkt	60 Pkt	48 Pcnt	-64 C
1761445876	14.1 Volt	24 Pkt	70 Pkt	45 Pcnt	-64 C
1761442272	14.1 Volt	26 Pkt	90 Pkt	51 Pcnt	-64 C
1761435065	14.1 Volt	15 Pkt	30 Pkt	47 Pcnt	-64 C
1761431467	14.1 Volt	11 Pkt	30 Pkt	47 Pcnt	-64 C
1761427858	14.1 Volt	11 Pkt	50 Pkt	42 Pcnt	-64 C
1761424255	14.1 Volt	11 Pkt	40 Pkt	42 Pcnt	-64 C
1761420651	14.1 Volt	16 Pkt	60 Pkt	45 Pcnt	-64 C
1761409841	14.1 Volt	16 Pkt	60 Pkt	49 Pcnt	-64 C
1761406237	14.1 Volt	13 Pkt	30 Pkt	49 Pcnt	-64 C
1761402634	14.1 Volt	13 Pkt	40 Pkt	45 Pcnt	-64 C
1761399031	14.1 Volt	17 Pkt	40 Pkt	52 Pcnt	-64 C
1761395427	14.1 Volt	16 Pkt	40 Pkt	47 Pcnt	-64 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx10m: 0, 1, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)