This is the latest recevied telemetry packets stored in our database for station/object EA2KR-5. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
Vbat*
I*
TChip*
na*
na*
1789922201
0 V
0 mA
28.5 C
0 %
880 hPa
1789920740
3.74 V
0 mA
26 C
0 %
880 hPa
1789917558
3.78 V
0 mA
26 C
0 %
880 hPa
1789914379
3.78 V
0 mA
25.5 C
0 %
880 hPa
1789911199
3.78 V
0 mA
26 C
0 %
880 hPa
1789908018
3.8 V
0 mA
26.5 C
0 %
880 hPa
1789904838
3.8 V
0 mA
26 C
0 %
880 hPa
1789901658
3.82 V
0 mA
31.5 C
0 %
880 hPa
1789895308
3.82 V
0 mA
34.5 C
0 %
880 hPa
1789882579
3.86 V
0 mA
20 C
0 %
880 hPa
1789879400
3.88 V
0 mA
20.5 C
0 %
880 hPa
1789873041
3.9 V
0 mA
20.5 C
0 %
880 hPa
1789869861
3.92 V
0 mA
21 C
0 %
880 hPa
1789863513
3.94 V
0 mA
22 C
0 %
880 hPa
1789860322
3.94 V
0 mA
22 C
0 %
880 hPa
1789857142
3.96 V
0 mA
22.5 C
0 %
880 hPa
1789853963
3.98 V
0 mA
23 C
0 %
880 hPa
1789850782
3.98 V
0 mA
23 C
0 %
880 hPa
1789847604
4 V
0 mA
23.5 C
0 %
880 hPa
1789838065
4 V
0 mA
26.5 C
0 %
880 hPa
1789834885
4.02 V
0 mA
27 C
0 %
880 hPa
1789690431
4.06 V
0 mA
24 C
0 %
880 hPa
1789687251
4.08 V
0 mA
24.5 C
0 %
880 hPa
1789684073
4.12 V
0 mA
25 C
0 %
880 hPa
*Used Equation Coefficients:
Vbat: 0, 0.02, 0
I: 0, 10, -1280
TChip: 0, 0.5, -20
na: 0, 0.5, 0
na: 0, 1, 880
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)