BM3FFG-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BM3FFG-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	ALL_PKTS_10M*	FWD_APRS_10M*	POS_PKTS_10M*	MSG_PKTS_10M*	CTRL_PKTS_10M*
1789973569	36 cnt	0 cnt	28 cnt	0 cnt	8 cnt
1789972970	56 cnt	0 cnt	34 cnt	2 cnt	20 cnt
1789972369	51 cnt	0 cnt	37 cnt	1 cnt	13 cnt
1789971770	42 cnt	0 cnt	28 cnt	1 cnt	13 cnt
1789971170	44 cnt	0 cnt	30 cnt	1 cnt	13 cnt
1789970569	50 cnt	0 cnt	32 cnt	1 cnt	17 cnt
1789969969	51 cnt	0 cnt	30 cnt	0 cnt	21 cnt
1789969370	57 cnt	0 cnt	37 cnt	0 cnt	20 cnt
1789968769	49 cnt	0 cnt	33 cnt	1 cnt	15 cnt
1789968169	46 cnt	0 cnt	32 cnt	0 cnt	14 cnt
1789967569	39 cnt	0 cnt	30 cnt	0 cnt	9 cnt
1789966969	50 cnt	0 cnt	29 cnt	4 cnt	17 cnt
1789966368	47 cnt	0 cnt	30 cnt	0 cnt	17 cnt
1789965768	45 cnt	0 cnt	28 cnt	1 cnt	16 cnt
1789965168	40 cnt	0 cnt	23 cnt	1 cnt	16 cnt
1789964568	57 cnt	0 cnt	40 cnt	0 cnt	17 cnt
1789963968	53 cnt	0 cnt	37 cnt	1 cnt	15 cnt
1789963368	45 cnt	0 cnt	31 cnt	0 cnt	14 cnt
1789962768	42 cnt	0 cnt	25 cnt	2 cnt	15 cnt
1789962168	54 cnt	0 cnt	36 cnt	1 cnt	17 cnt
1789961568	51 cnt	0 cnt	32 cnt	1 cnt	18 cnt
1789960968	43 cnt	0 cnt	35 cnt	0 cnt	8 cnt
1789960368	53 cnt	4 cnt	38 cnt	0 cnt	15 cnt
1789959768	54 cnt	3 cnt	39 cnt	0 cnt	15 cnt
1789959168	47 cnt	1 cnt	33 cnt	0 cnt	14 cnt

*Used Equation Coefficients:

ALL_PKTS_10M: 0, 1, 0

FWD_APRS_10M: 0, 1, 0

POS_PKTS_10M: 0, 1, 0

MSG_PKTS_10M: 0, 1, 0

CTRL_PKTS_10M: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)