OE6OCG-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE6OCG-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1753609377	950.3 hPa	30.3 C deg	1006.6 hPa	0 C deg
1753605317	949.9 hPa	29.3 C deg	1006.3 hPa	0 C deg
1753603517	950 hPa	28.8 C deg	1006.5 hPa	0 C deg
1753527813	954.6 hPa	30.6 C deg	1011.1 hPa	0 C deg
1753524828	954.7 hPa	28.8 C deg	1011.5 hPa	0 C deg
1753522950	955 hPa	28.5 C deg	1011.9 hPa	0 C deg
1753521101	954.6 hPa	28.4 C deg	1011.5 hPa	0 C deg
1753518675	954.4 hPa	28.8 C deg	1011.2 hPa	0 C deg
1753516875	954.8 hPa	29 C deg	1011.6 hPa	0 C deg
1753515079	953.8 hPa	28.5 C deg	1010.6 hPa	0 C deg
1753513286	954.4 hPa	28.7 C deg	1011.2 hPa	0 C deg
1753510732	953.9 hPa	28.6 C deg	1010.7 hPa	0 C deg
1753507114	953.4 hPa	29.4 C deg	1010 hPa	0 C deg
1753505316	953.6 hPa	29.3 C deg	1010.2 hPa	0 C deg
1753503513	953.4 hPa	29.1 C deg	1010.1 hPa	0 C deg
1753501713	953.8 hPa	29 C deg	1010.5 hPa	0 C deg
1753499913	954.1 hPa	28.9 C deg	1010.9 hPa	0 C deg
1753498113	953.9 hPa	28.8 C deg	1010.6 hPa	0 C deg
1753496313	954.3 hPa	28.7 C deg	1011.1 hPa	0 C deg
1753494513	954.5 hPa	28.4 C deg	1011.4 hPa	0 C deg
1753492713	954.6 hPa	28.3 C deg	1011.5 hPa	0 C deg
1753490936	954.9 hPa	28.1 C deg	1011.9 hPa	0 C deg
1753488346	954.9 hPa	28.1 C deg	1011.8 hPa	0 C deg
1753486546	955.4 hPa	28.4 C deg	1012.3 hPa	0 C deg
1753484746	955.8 hPa	28.4 C deg	1012.8 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)