OE6XDF-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE6XDF-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	eGAS*	Temp.out*
1761506891	968.7 hPa	13.6 C deg	64.7 %	709 -	0 C deg
1761505091	968.7 hPa	13.6 C deg	64.8 %	709 -	0 C deg
1761503290	968.2 hPa	13.7 C deg	65 %	683 -	0 C deg
1761501490	968.3 hPa	13.8 C deg	64.4 %	721 -	0 C deg
1761497889	967.7 hPa	13.8 C deg	64 %	814 -	0 C deg
1761494303	967.2 hPa	14 C deg	63.1 %	907 -	0 C deg
1761490689	967.4 hPa	14 C deg	63.1 %	932 -	0 C deg
1761487088	966.6 hPa	14.2 C deg	62.2 %	902 -	0 C deg
1761485288	966.2 hPa	14.3 C deg	61.7 %	921 -	0 C deg
1761483488	966.2 hPa	14.2 C deg	62.7 %	883 -	0 C deg
1761481688	966.4 hPa	14.2 C deg	63.1 %	854 -	0 C deg
1761479888	966.6 hPa	14.1 C deg	64 %	811 -	0 C deg
1761476287	966.9 hPa	14 C deg	64.3 %	783 -	0 C deg
1761474487	967 hPa	14 C deg	64.9 %	734 -	0 C deg
1761472694	967.1 hPa	13.9 C deg	64.7 %	706 -	0 C deg
1761470887	967.3 hPa	13.7 C deg	64.2 %	651 -	0 C deg
1761469095	967.5 hPa	13.6 C deg	63.8 %	620 -	0 C deg
1761467287	967.5 hPa	13.6 C deg	63.2 %	608 -	0 C deg
1761460086	967.2 hPa	13.2 C deg	60 %	608 -	0 C deg
1761458286	966.9 hPa	13.3 C deg	59.7 %	614 -	0 C deg
1761454685	966.5 hPa	13.3 C deg	60.1 %	610 -	0 C deg
1761452885	966.4 hPa	13.4 C deg	60.2 %	605 -	0 C deg
1761451086	966.4 hPa	13.4 C deg	60.1 %	616 -	0 C deg
1761449285	966.6 hPa	13.5 C deg	59.4 %	628 -	0 C deg
1761447485	966.5 hPa	13.3 C deg	59.8 %	620 -	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

eGAS: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)