SQ3SHC-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SQ3SHC-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1755713405	35 Deg.C	2 %
1755712204	33 Deg.C	3 %
1755702602	36 Deg.C	2 %
1755702002	37 Deg.C	2 %
1755700802	36 Deg.C	2 %
1755699602	37 Deg.C	2 %
1755698401	36 Deg.C	2 %
1755697802	36 Deg.C	2 %
1755697205	37 Deg.C	2 %
1755696601	37 Deg.C	2 %
1755696005	36 Deg.C	2 %
1755695401	37 Deg.C	2 %
1755694202	38 Deg.C	2 %
1755693601	37 Deg.C	2 %
1755692402	37 Deg.C	2 %
1755691201	36 Deg.C	2 %
1755690605	36 Deg.C	2 %
1755690001	36 Deg.C	2 %
1755689401	36 Deg.C	2 %
1755688805	37 Deg.C	2 %
1755688201	36 Deg.C	2 %
1755686405	36 Deg.C	2 %
1755685802	36 Deg.C	2 %
1755685201	36 Deg.C	2 %
1755684605	36 Deg.C	2 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)