KK4YEL-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KK4YEL-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	Temp*
1777114935	407 Pkts	404 Pkts	33 C
1777111335	153 Pkts	151 Pkts	33 C
1777107735	126 Pkts	122 Pkts	33 C
1777104135	119 Pkts	115 Pkts	33 C
1777100535	100 Pkts	91 Pkts	32 C
1777096935	83 Pkts	79 Pkts	32 C
1777093335	81 Pkts	77 Pkts	32 C
1777089735	83 Pkts	81 Pkts	32 C
1777086135	97 Pkts	93 Pkts	33 C
1777082535	105 Pkts	101 Pkts	32 C
1777078935	100 Pkts	96 Pkts	32 C
1777075335	77 Pkts	73 Pkts	31 C
1777071735	81 Pkts	79 Pkts	29 C
1777068135	170 Pkts	167 Pkts	29 C
1777064535	132 Pkts	128 Pkts	30 C
1777060935	99 Pkts	95 Pkts	30 C
1777057335	115 Pkts	111 Pkts	32 C
1777053735	119 Pkts	115 Pkts	32 C
1777050135	84 Pkts	80 Pkts	31 C
1777046535	169 Pkts	165 Pkts	30 C
1777042935	118 Pkts	114 Pkts	31 C
1777039335	186 Pkts	182 Pkts	32 C
1777035735	199 Pkts	196 Pkts	33 C
1777032135	165 Pkts	161 Pkts	33 C
1777028535	208 Pkts	205 Pkts	33 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)