N4NE-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N4NE-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1772661818	0.12 Rx Erlang	0.02 Tx Erlang	115 count/10m	0 count/10m	18 count/10m
1772660618	0.12 Rx Erlang	0.02 Tx Erlang	126 count/10m	0 count/10m	23 count/10m
1772659418	0.13 Rx Erlang	0.02 Tx Erlang	127 count/10m	0 count/10m	18 count/10m
1772658218	0.17 Rx Erlang	0.02 Tx Erlang	143 count/10m	11 count/10m	15 count/10m
1772657018	0.14 Rx Erlang	0.02 Tx Erlang	128 count/10m	1 count/10m	19 count/10m
1772655818	0.13 Rx Erlang	0.02 Tx Erlang	123 count/10m	3 count/10m	16 count/10m
1772654618	0.15 Rx Erlang	0.02 Tx Erlang	145 count/10m	21 count/10m	21 count/10m
1772653418	0.17 Rx Erlang	0.03 Tx Erlang	158 count/10m	18 count/10m	26 count/10m
1772652218	0.14 Rx Erlang	0.02 Tx Erlang	152 count/10m	4 count/10m	25 count/10m
1772651018	0.18 Rx Erlang	0.03 Tx Erlang	168 count/10m	19 count/10m	26 count/10m
1772649818	0.14 Rx Erlang	0.03 Tx Erlang	145 count/10m	3 count/10m	25 count/10m
1772648618	0.15 Rx Erlang	0.02 Tx Erlang	142 count/10m	0 count/10m	22 count/10m
1772647418	0.13 Rx Erlang	0.02 Tx Erlang	112 count/10m	0 count/10m	17 count/10m
1772646218	0.12 Rx Erlang	0.02 Tx Erlang	109 count/10m	2 count/10m	16 count/10m
1772645018	0.15 Rx Erlang	0.02 Tx Erlang	145 count/10m	11 count/10m	20 count/10m
1772643818	0.15 Rx Erlang	0.02 Tx Erlang	142 count/10m	0 count/10m	19 count/10m
1772642618	0.15 Rx Erlang	0.02 Tx Erlang	152 count/10m	13 count/10m	21 count/10m
1772641418	0.18 Rx Erlang	0.02 Tx Erlang	175 count/10m	1 count/10m	25 count/10m
1772640218	0.18 Rx Erlang	0.02 Tx Erlang	173 count/10m	1 count/10m	23 count/10m
1772639018	0.15 Rx Erlang	0.02 Tx Erlang	150 count/10m	0 count/10m	23 count/10m
1772637818	0.17 Rx Erlang	0.02 Tx Erlang	168 count/10m	9 count/10m	24 count/10m
1772635418	0.15 Rx Erlang	0.02 Tx Erlang	156 count/10m	1 count/10m	15 count/10m
1772634218	0.17 Rx Erlang	0.02 Tx Erlang	167 count/10m	0 count/10m	18 count/10m
1772633018	0.18 Rx Erlang	0.02 Tx Erlang	173 count/10m	0 count/10m	25 count/10m
1772631818	0.17 Rx Erlang	0.03 Tx Erlang	168 count/10m	1 count/10m	25 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)