OE3XTV Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE3XTV. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Temp*
1776661164	13.65 Volt	80 Pkt	97 Pcnt	15 Grad
1776660863	13.65 Volt	80 Pkt	97 Pcnt	15 Grad
1776660264	13.65 Volt	80 Pkt	97 Pcnt	15 Grad
1776660263	13.65 Volt	80 Pkt	97 Pcnt	15 Grad
1776659663	13.65 Volt	80 Pkt	95 Pcnt	15 Grad
1776659364	13.65 Volt	80 Pkt	90 Pcnt	15 Grad
1776659063	13.65 Volt	80 Pkt	86 Pcnt	15 Grad
1776658464	13.65 Volt	80 Pkt	74 Pcnt	15 Grad
1776658463	13.65 Volt	80 Pkt	74 Pcnt	15 Grad
1776657863	13.65 Volt	80 Pkt	72 Pcnt	15 Grad
1776657564	13.65 Volt	80 Pkt	70 Pcnt	15 Grad
1776657263	13.65 Volt	80 Pkt	68 Pcnt	15.5 Grad
1776656664	13.65 Volt	80 Pkt	65 Pcnt	15 Grad
1776656663	13.65 Volt	80 Pkt	65 Pcnt	15 Grad
1776656063	13.65 Volt	80 Pkt	63 Pcnt	15 Grad
1776655764	13.65 Volt	70 Pkt	66 Pcnt	15 Grad
1776655463	13.65 Volt	70 Pkt	69 Pcnt	15 Grad
1776654864	13.65 Volt	70 Pkt	71 Pcnt	15 Grad
1776654863	13.65 Volt	70 Pkt	71 Pcnt	15 Grad
1776654263	13.65 Volt	80 Pkt	75 Pcnt	15 Grad
1776653964	13.65 Volt	80 Pkt	79 Pcnt	15 Grad
1776653663	13.65 Volt	80 Pkt	77 Pcnt	15 Grad
1776653064	13.65 Volt	70 Pkt	79 Pcnt	15 Grad
1776653063	13.65 Volt	70 Pkt	79 Pcnt	15 Grad
1776652463	13.65 Volt	80 Pkt	78 Pcnt	15 Grad

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)