S55YAR-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object S55YAR-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vradio*	Dg1h*	Eff1h*	T*
1776644538	12.35 Volt	80 Pkt	88 Pcnt	4 °C
1776644238	12.35 Volt	80 Pkt	86 Pcnt	4 °C
1776643938	12.35 Volt	80 Pkt	84 Pcnt	4 °C
1776643638	12.35 Volt	80 Pkt	84 Pcnt	4 °C
1776643338	12.35 Volt	80 Pkt	83 Pcnt	4 °C
1776643038	12.35 Volt	80 Pkt	81 Pcnt	4 °C
1776642738	12.27 Volt	80 Pkt	80 Pcnt	4 °C
1776642438	12.35 Volt	80 Pkt	81 Pcnt	4 °C
1776642138	12.35 Volt	80 Pkt	81 Pcnt	4 °C
1776641838	12.35 Volt	80 Pkt	83 Pcnt	4 °C
1776641538	12.35 Volt	80 Pkt	85 Pcnt	4 °C
1776641238	12.35 Volt	80 Pkt	86 Pcnt	4 °C
1776640938	12.35 Volt	80 Pkt	88 Pcnt	4 °C
1776640638	12.35 Volt	80 Pkt	91 Pcnt	4 °C
1776640338	12.35 Volt	80 Pkt	93 Pcnt	4 °C
1776640038	12.35 Volt	80 Pkt	91 Pcnt	4.5 °C
1776639738	12.35 Volt	80 Pkt	93 Pcnt	4.5 °C
1776639438	12.35 Volt	80 Pkt	95 Pcnt	4.5 °C
1776639138	12.35 Volt	80 Pkt	94 Pcnt	4.5 °C
1776638838	12.35 Volt	80 Pkt	94 Pcnt	4.5 °C
1776638538	12.35 Volt	80 Pkt	94 Pcnt	4.5 °C
1776638238	12.35 Volt	80 Pkt	94 Pcnt	4.5 °C
1776637938	12.35 Volt	80 Pkt	93 Pcnt	4.5 °C
1776637638	12.35 Volt	80 Pkt	93 Pcnt	4.5 °C
1776637338	12.35 Volt	80 Pkt	92 Pcnt	4.5 °C

*Used Equation Coefficients:

Vradio: 0, 0.078226, 0.07

Vkoca: 0, 0.0738, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

T: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)