SQ5STR-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SQ5STR-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*
1753637192	28 Count	810 Count
1753635990	27 Count	779 Count
1753635765	26 Count	779 Count
1753634565	25 Count	695 Count
1753633364	24 Count	649 Count
1753632163	23 Count	624 Count
1753630962	22 Count	603 Count
1753629761	21 Count	571 Count
1753628577	20 Count	545 Count
1753627360	19 Count	530 Count
1753626175	18 Count	500 Count
1753624974	17 Count	474 Count
1753623773	16 Count	455 Count
1753621372	14 Count	399 Count
1753620170	13 Count	377 Count
1753618970	12 Count	345 Count
1753617769	11 Count	317 Count
1753616569	10 Count	293 Count
1753615367	9 Count	261 Count
1753614166	8 Count	235 Count
1753611764	6 Count	195 Count
1753610564	5 Count	169 Count
1753609379	4 Count	142 Count
1753608162	3 Count	113 Count
1753606961	2 Count	84 Count

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)