DF3DT-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DF3DT-5. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1761506001	998.2 hPa	20 C deg	48.6 %	998.3 hPa	0 C deg
1761502400	998.5 hPa	20.5 C deg	45.3 %	998.6 hPa	0 C deg
1761500600	998.4 hPa	20.5 C deg	44.9 %	998.5 hPa	0 C deg
1761498800	998.3 hPa	20.4 C deg	45.8 %	998.4 hPa	0 C deg
1761496999	998 hPa	20.7 C deg	45 %	998.1 hPa	0 C deg
1761495199	997.8 hPa	20.7 C deg	44.6 %	998 hPa	0 C deg
1761493399	997.6 hPa	20.8 C deg	44.4 %	997.7 hPa	0 C deg
1761491598	997.3 hPa	21 C deg	43.8 %	997.4 hPa	0 C deg
1761489798	997 hPa	20.9 C deg	44 %	997.1 hPa	0 C deg
1761487998	996.7 hPa	21.6 C deg	42 %	996.8 hPa	0 C deg
1761486198	996.3 hPa	22 C deg	41.5 %	996.5 hPa	0 C deg
1761484398	996.1 hPa	22.2 C deg	41.3 %	996.2 hPa	0 C deg
1761482598	995.8 hPa	22.2 C deg	41.3 %	995.9 hPa	0 C deg
1761480798	995.3 hPa	22.5 C deg	40.4 %	995.5 hPa	0 C deg
1761478998	995.1 hPa	22.1 C deg	41 %	995.2 hPa	0 C deg
1761477197	994.5 hPa	22.2 C deg	40.7 %	994.6 hPa	0 C deg
1761475397	994.2 hPa	21.6 C deg	41.9 %	994.3 hPa	0 C deg
1761473597	993.8 hPa	21.2 C deg	42.3 %	994 hPa	0 C deg
1761471797	993.2 hPa	21.1 C deg	42 %	993.3 hPa	0 C deg
1761471456	993.1 hPa	23.7 C deg	36 %	993.3 hPa	0 C deg
1761464029	990.6 hPa	23.6 C deg	36.8 %	990.7 hPa	0 C deg
1761462229	990.1 hPa	22.7 C deg	38.9 %	990.2 hPa	0 C deg
1761460429	989.7 hPa	17.6 C deg	48.2 %	989.8 hPa	0 C deg
1761425575	996.2 hPa	26.6 C deg	31.5 %	996.3 hPa	0 C deg
1761423775	996.1 hPa	26.8 C deg	31.5 %	996.2 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)