W8VFR-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W8VFR-5. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1761538207	0.12 Rx Erlang	0.01 Tx Erlang	110 count/10m	8 count/10m	8 count/10m
1761537007	0.1 Rx Erlang	0.01 Tx Erlang	84 count/10m	2 count/10m	7 count/10m
1761535807	0.09 Rx Erlang	0.01 Tx Erlang	89 count/10m	8 count/10m	8 count/10m
1761534607	0.1 Rx Erlang	0.01 Tx Erlang	90 count/10m	6 count/10m	7 count/10m
1761533407	0.09 Rx Erlang	0.01 Tx Erlang	79 count/10m	4 count/10m	9 count/10m
1761532207	0.09 Rx Erlang	0 Tx Erlang	88 count/10m	5 count/10m	5 count/10m
1761531007	0.09 Rx Erlang	0.01 Tx Erlang	84 count/10m	5 count/10m	8 count/10m
1761529807	0.1 Rx Erlang	0.01 Tx Erlang	79 count/10m	0 count/10m	7 count/10m
1761528607	0.07 Rx Erlang	0.01 Tx Erlang	68 count/10m	1 count/10m	6 count/10m
1761527407	0.07 Rx Erlang	0.01 Tx Erlang	67 count/10m	0 count/10m	7 count/10m
1761526207	0.06 Rx Erlang	0.01 Tx Erlang	58 count/10m	0 count/10m	6 count/10m
1761523807	0.08 Rx Erlang	0.01 Tx Erlang	79 count/10m	1 count/10m	7 count/10m
1761522607	0.08 Rx Erlang	0.01 Tx Erlang	79 count/10m	0 count/10m	6 count/10m
1761521407	0.09 Rx Erlang	0.01 Tx Erlang	81 count/10m	10 count/10m	7 count/10m
1761520207	0.07 Rx Erlang	0.01 Tx Erlang	66 count/10m	2 count/10m	8 count/10m
1761519007	0.08 Rx Erlang	0 Tx Erlang	80 count/10m	5 count/10m	6 count/10m
1761517807	0.09 Rx Erlang	0.01 Tx Erlang	84 count/10m	4 count/10m	8 count/10m
1761515407	0.08 Rx Erlang	0 Tx Erlang	78 count/10m	0 count/10m	5 count/10m
1761514215	0.09 Rx Erlang	0.01 Tx Erlang	90 count/10m	0 count/10m	8 count/10m
1761513007	0.07 Rx Erlang	0 Tx Erlang	67 count/10m	0 count/10m	6 count/10m
1761511807	0.06 Rx Erlang	0.01 Tx Erlang	67 count/10m	0 count/10m	6 count/10m
1761510607	0.06 Rx Erlang	0.01 Tx Erlang	59 count/10m	0 count/10m	7 count/10m
1761509407	0.05 Rx Erlang	0.01 Tx Erlang	48 count/10m	2 count/10m	6 count/10m
1761508207	0.07 Rx Erlang	0.01 Tx Erlang	63 count/10m	3 count/10m	8 count/10m
1761507007	0.07 Rx Erlang	0.01 Tx Erlang	71 count/10m	5 count/10m	10 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)