SP8SD-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP8SD-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Eff*
1789897817	13.35 Volt	710 Pkt	510 Pkt	85 Pcnt	86 Pcnt
1789897096	13.88 Volt	720 Pkt	520 Pkt	85 Pcnt	86 Pcnt
1789896376	13.43 Volt	690 Pkt	510 Pkt	84 Pcnt	86 Pcnt
1789895661	13.58 Volt	650 Pkt	500 Pkt	83 Pcnt	86 Pcnt
1789894934	13.88 Volt	640 Pkt	490 Pkt	84 Pcnt	86 Pcnt
1789894217	13.88 Volt	600 Pkt	470 Pkt	85 Pcnt	86 Pcnt
1789893493	13.95 Volt	610 Pkt	470 Pkt	86 Pcnt	86 Pcnt
1789892772	13.73 Volt	630 Pkt	470 Pkt	86 Pcnt	87 Pcnt
1789892052	13.35 Volt	660 Pkt	460 Pkt	86 Pcnt	87 Pcnt
1789891331	13.88 Volt	690 Pkt	470 Pkt	87 Pcnt	87 Pcnt
1789890610	13.95 Volt	720 Pkt	480 Pkt	86 Pcnt	87 Pcnt
1789889889	13.73 Volt	720 Pkt	480 Pkt	87 Pcnt	87 Pcnt
1789889169	13.95 Volt	750 Pkt	510 Pkt	86 Pcnt	87 Pcnt
1789888449	13.95 Volt	770 Pkt	530 Pkt	87 Pcnt	87 Pcnt
1789887731	13.95 Volt	780 Pkt	530 Pkt	87 Pcnt	87 Pcnt
1789887007	13.88 Volt	630 Pkt	430 Pkt	88 Pcnt	88 Pcnt
1789886288	13.95 Volt	470 Pkt	320 Pkt	87 Pcnt	87 Pcnt
1789885565	13.88 Volt	320 Pkt	210 Pkt	89 Pcnt	89 Pcnt
1789884845	13.95 Volt	160 Pkt	100 Pkt	90 Pcnt	90 Pcnt
1789884124	13.95 Volt	0 Pkt	0 Pkt	50 Pcnt	50 Pcnt
1789315675	13.95 Volt	610 Pkt	480 Pkt	85 Pcnt	83 Pcnt
1789314955	13.95 Volt	650 Pkt	510 Pkt	85 Pcnt	83 Pcnt
1789314240	13.5 Volt	660 Pkt	520 Pkt	84 Pcnt	83 Pcnt
1789313513	13.88 Volt	650 Pkt	510 Pkt	84 Pcnt	83 Pcnt
1789312797	13.95 Volt	670 Pkt	520 Pkt	84 Pcnt	83 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)