XE2KK-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object XE2KK-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1784672434	0.29 Load	64.99 DegC	73 Mb	511 Pkt	730 Pkt
1784671538	0.51 Load	64.45 DegC	67 Mb	544 Pkt	765 Pkt
1784670634	0.37 Load	64.45 DegC	64 Mb	535 Pkt	657 Pkt
1784669734	0.47 Load	64.45 DegC	79 Mb	473 Pkt	629 Pkt
1784668834	0.4 Load	64.45 DegC	76 Mb	552 Pkt	767 Pkt
1784667934	0.52 Load	63.91 DegC	62 Mb	530 Pkt	751 Pkt
1784667034	0.43 Load	63.38 DegC	71 Mb	493 Pkt	626 Pkt
1784666134	0.53 Load	63.38 DegC	73 Mb	497 Pkt	649 Pkt
1784665234	0.41 Load	62.84 DegC	72 Mb	558 Pkt	776 Pkt
1784664334	0.35 Load	63.38 DegC	77 Mb	533 Pkt	650 Pkt
1784663434	0.45 Load	62.84 DegC	73 Mb	489 Pkt	647 Pkt
1784662535	0.45 Load	63.38 DegC	70 Mb	571 Pkt	770 Pkt
1784661634	0.38 Load	62.84 DegC	73 Mb	541 Pkt	765 Pkt
1784660734	0.57 Load	62.84 DegC	69 Mb	536 Pkt	657 Pkt
1784659834	0.36 Load	62.84 DegC	71 Mb	499 Pkt	651 Pkt
1784658934	0.42 Load	62.3 DegC	72 Mb	553 Pkt	764 Pkt
1784658034	0.59 Load	62.3 DegC	80 Mb	530 Pkt	746 Pkt
1784657134	0.47 Load	61.22 DegC	75 Mb	535 Pkt	662 Pkt
1784656235	0.45 Load	62.3 DegC	76 Mb	522 Pkt	683 Pkt
1784655334	0.61 Load	61.76 DegC	73 Mb	562 Pkt	789 Pkt
1784654435	0.44 Load	61.22 DegC	70 Mb	557 Pkt	792 Pkt
1784653534	0.42 Load	61.76 DegC	71 Mb	572 Pkt	705 Pkt
1784652635	0.33 Load	61.22 DegC	87 Mb	527 Pkt	689 Pkt
1784651734	0.35 Load	61.22 DegC	80 Mb	573 Pkt	812 Pkt
1784650834	0.46 Load	60.69 DegC	71 Mb	572 Pkt	812 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)