VA6JG Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VA6JG. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1761620392	13.43 Volt	10 Pkt	10 Pkt	43 Pcnt
1761620094	13.43 Volt	10 Pkt	10 Pkt	41 Pcnt
1761620092	13.43 Volt	10 Pkt	10 Pkt	41 Pcnt
1761619792	13.43 Volt	10 Pkt	0 Pkt	33 Pcnt
1761619494	13.43 Volt	10 Pkt	0 Pkt	30 Pcnt
1761619492	13.43 Volt	10 Pkt	0 Pkt	30 Pcnt
1761619192	13.43 Volt	10 Pkt	0 Pkt	27 Pcnt
1761618892	13.43 Volt	10 Pkt	0 Pkt	27 Pcnt
1761618592	13.43 Volt	10 Pkt	0 Pkt	26 Pcnt
1761618294	13.43 Volt	10 Pkt	0 Pkt	29 Pcnt
1761618292	13.43 Volt	10 Pkt	0 Pkt	29 Pcnt
1761617992	13.43 Volt	10 Pkt	0 Pkt	28 Pcnt
1761617692	13.43 Volt	10 Pkt	0 Pkt	28 Pcnt
1761617392	13.43 Volt	10 Pkt	0 Pkt	25 Pcnt
1761617094	13.43 Volt	10 Pkt	0 Pkt	24 Pcnt
1761617092	13.43 Volt	10 Pkt	0 Pkt	24 Pcnt
1761616792	13.43 Volt	10 Pkt	0 Pkt	24 Pcnt
1761616494	13.43 Volt	10 Pkt	0 Pkt	22 Pcnt
1761616492	13.43 Volt	10 Pkt	0 Pkt	22 Pcnt
1761616192	13.43 Volt	10 Pkt	0 Pkt	26 Pcnt
1761615894	13.43 Volt	10 Pkt	0 Pkt	23 Pcnt
1761615892	13.43 Volt	10 Pkt	0 Pkt	23 Pcnt
1761615592	13.43 Volt	10 Pkt	0 Pkt	22 Pcnt
1761615294	13.43 Volt	0 Pkt	0 Pkt	18 Pcnt
1761615292	13.43 Volt	0 Pkt	0 Pkt	18 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)