This is the latest recevied telemetry packets stored in our database for station/object SP9DAT-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1749456509 | 262 Count | 246 Count | 160 Count | 0 VDC | 0 VDC |
| 1749455608 | 257 Count | 241 Count | 157 Count | 0 VDC | 0 VDC |
| 1749454707 | 253 Count | 239 Count | 156 Count | 0 VDC | 0 VDC |
| 1749453805 | 250 Count | 238 Count | 155 Count | 0 VDC | 0 VDC |
| 1749452921 | 244 Count | 229 Count | 152 Count | 0 VDC | 0 VDC |
| 1749452003 | 232 Count | 216 Count | 142 Count | 0 VDC | 0 VDC |
| 1749451102 | 224 Count | 210 Count | 137 Count | 0 VDC | 0 VDC |
| 1749450202 | 220 Count | 206 Count | 135 Count | 0 VDC | 0 VDC |
| 1749449300 | 212 Count | 197 Count | 130 Count | 0 VDC | 0 VDC |
| 1749448399 | 206 Count | 190 Count | 126 Count | 0 VDC | 0 VDC |
| 1749447498 | 200 Count | 184 Count | 122 Count | 0 VDC | 0 VDC |
| 1749446690 | 196 Count | 179 Count | 120 Count | 0 VDC | 0 VDC |
| 1749445789 | 186 Count | 170 Count | 112 Count | 0 VDC | 0 VDC |
| 1749444888 | 181 Count | 166 Count | 109 Count | 0 VDC | 0 VDC |
| 1749443987 | 176 Count | 163 Count | 107 Count | 0 VDC | 0 VDC |
| 1749443086 | 173 Count | 162 Count | 106 Count | 0 VDC | 0 VDC |
| 1749442186 | 168 Count | 160 Count | 104 Count | 0 VDC | 0 VDC |
| 1749441285 | 166 Count | 154 Count | 104 Count | 0 VDC | 0 VDC |
| 1749440384 | 161 Count | 152 Count | 102 Count | 0 VDC | 0 VDC |
| 1749439483 | 158 Count | 150 Count | 101 Count | 0 VDC | 0 VDC |
| 1749438582 | 152 Count | 145 Count | 97 Count | 0 VDC | 0 VDC |
| 1749437681 | 148 Count | 143 Count | 95 Count | 0 VDC | 0 VDC |
| 1749436780 | 143 Count | 141 Count | 93 Count | 0 VDC | 0 VDC |
| 1749435878 | 139 Count | 138 Count | 91 Count | 0 VDC | 0 VDC |
| 1749434977 | 132 Count | 134 Count | 87 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)