N8FLA-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N8FLA-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	DigiRpt*	Temp*
1753632283	285 Pkts	26 Pkts	67 C
1753628665	328 Pkts	26 Pkts	70 C
1753625065	316 Pkts	39 Pkts	72 C
1753621465	363 Pkts	60 Pkts	69 C
1753617865	407 Pkts	90 Pkts	64 C
1753614265	362 Pkts	69 Pkts	59 C
1753610665	286 Pkts	44 Pkts	59 C
1753607065	253 Pkts	24 Pkts	59 C
1753599876	283 Pkts	29 Pkts	51 C
1753596276	242 Pkts	19 Pkts	51 C
1753592676	237 Pkts	29 Pkts	51 C
1753589076	250 Pkts	32 Pkts	51 C
1753585476	242 Pkts	17 Pkts	51 C
1753581888	243 Pkts	15 Pkts	52 C
1753578277	235 Pkts	11 Pkts	61 C
1753574696	191 Pkts	16 Pkts	61 C
1753571077	241 Pkts	22 Pkts	67 C
1753567477	275 Pkts	30 Pkts	69 C
1753563877	245 Pkts	24 Pkts	69 C
1753560277	226 Pkts	27 Pkts	68 C
1753556677	233 Pkts	40 Pkts	68 C
1753553077	256 Pkts	27 Pkts	69 C
1753549477	236 Pkts	25 Pkts	68 C
1753545877	246 Pkts	64 Pkts	70 C
1753542277	292 Pkts	22 Pkts	69 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)