N8QH-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N8QH-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1761526322	0.12 Rx Erlang	0 Tx Erlang	300 count/10m	300 count/10m	0 count/10m
1761522722	0.12 Rx Erlang	0 Tx Erlang	305 count/10m	300 count/10m	0 count/10m
1761521522	0.12 Rx Erlang	0 Tx Erlang	305 count/10m	300 count/10m	0 count/10m
1761520322	0.13 Rx Erlang	0 Tx Erlang	310 count/10m	300 count/10m	0 count/10m
1761517922	0.12 Rx Erlang	0 Tx Erlang	307 count/10m	300 count/10m	0 count/10m
1761516722	0.13 Rx Erlang	0 Tx Erlang	309 count/10m	300 count/10m	0 count/10m
1761515522	0.15 Rx Erlang	0 Tx Erlang	345 count/10m	300 count/10m	0 count/10m
1761514322	0.16 Rx Erlang	0 Tx Erlang	350 count/10m	300 count/10m	0 count/10m
1761513122	0.16 Rx Erlang	0 Tx Erlang	347 count/10m	300 count/10m	0 count/10m
1761511922	0.16 Rx Erlang	0 Tx Erlang	348 count/10m	300 count/10m	0 count/10m
1761510722	0.17 Rx Erlang	0 Tx Erlang	356 count/10m	300 count/10m	0 count/10m
1761509522	0.17 Rx Erlang	0 Tx Erlang	349 count/10m	302 count/10m	0 count/10m
1761508322	0.15 Rx Erlang	0 Tx Erlang	245 count/10m	214 count/10m	0 count/10m
1761504722	0.16 Rx Erlang	0 Tx Erlang	341 count/10m	301 count/10m	0 count/10m
1761503522	0.16 Rx Erlang	0 Tx Erlang	348 count/10m	300 count/10m	0 count/10m
1761497522	0.16 Rx Erlang	0 Tx Erlang	343 count/10m	300 count/10m	0 count/10m
1761496322	0.14 Rx Erlang	0 Tx Erlang	330 count/10m	303 count/10m	0 count/10m
1761495122	0.15 Rx Erlang	0 Tx Erlang	328 count/10m	302 count/10m	0 count/10m
1761493922	0.15 Rx Erlang	0 Tx Erlang	330 count/10m	300 count/10m	0 count/10m
1761487922	0.16 Rx Erlang	0 Tx Erlang	333 count/10m	300 count/10m	0 count/10m
1761486722	0.14 Rx Erlang	0 Tx Erlang	323 count/10m	300 count/10m	0 count/10m
1761483122	0.14 Rx Erlang	0 Tx Erlang	322 count/10m	300 count/10m	0 count/10m
1761480729	0.15 Rx Erlang	0 Tx Erlang	329 count/10m	301 count/10m	0 count/10m
1761475924	0.15 Rx Erlang	0 Tx Erlang	331 count/10m	300 count/10m	0 count/10m
1761473522	0.15 Rx Erlang	0 Tx Erlang	328 count/10m	300 count/10m	0 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)