YO3JAZ-D1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YO3JAZ-D1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Baro*	Vcc*	RSSI*	Load*
1765850858	30.5 C	1016.4 mbar	2.5 V	-88 dBm	10.8 %
1765850498	30.5 C	1016.4 mbar	2.5 V	-86 dBm	11.2 %
1765849778	30.5 C	1016.8 mbar	2.5 V	-86 dBm	10 %
1765849418	30.5 C	1016.8 mbar	2.5 V	-85 dBm	10 %
1765849058	30.5 C	1016.8 mbar	2.5 V	-86 dBm	11.2 %
1765848698	30.5 C	1016.8 mbar	2.5 V	-86 dBm	11.2 %
1765848338	30.5 C	1016.8 mbar	2.5 V	-86 dBm	11.2 %
1765847978	30.5 C	1016.8 mbar	2.5 V	-85 dBm	10 %
1765847618	30.5 C	1016.8 mbar	2.5 V	-86 dBm	10 %
1765847258	30 C	1016.8 mbar	2.5 V	-85 dBm	10.8 %
1765846898	30 C	1016.8 mbar	2.5 V	-86 dBm	11.2 %
1765846538	30 C	1016.8 mbar	2.5 V	-86 dBm	11.6 %
1765846178	30 C	1016.4 mbar	2.5 V	-86 dBm	10 %
1765845818	30 C	1016.8 mbar	2.5 V	-86 dBm	10 %
1765845458	30 C	1016.8 mbar	2.5 V	-85 dBm	10 %
1765845098	30 C	1016.8 mbar	2.5 V	-85 dBm	11.2 %
1765844738	30 C	1016.8 mbar	2.5 V	-86 dBm	11.2 %
1765844378	30 C	1016.8 mbar	2.5 V	-84 dBm	10 %
1765844018	30 C	1016.8 mbar	2.5 V	-84 dBm	10 %
1765843658	30 C	1016.8 mbar	2.5 V	-85 dBm	10 %
1765843298	30 C	1016.8 mbar	2.5 V	-85 dBm	10.8 %
1765842938	30 C	1017.2 mbar	2.5 V	-85 dBm	11.2 %
1765842218	29.5 C	1017.2 mbar	2.5 V	-86 dBm	10 %
1765841858	30 C	1016.8 mbar	2.5 V	-86 dBm	10 %
1765841498	29.5 C	1016.8 mbar	2.5 V	-87 dBm	11.2 %

*Used Equation Coefficients:

Temp: 0, 0.5, -25

Baro: 0, 0.4, 950

Vcc: 0, 0.004, 2.5

RSSI: 0, -1, 0

Load: 0, 0.4, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)