KN6RVH-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KN6RVH-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1776627239	0 Count	24 Count	0 Count	0 VDC	0 VDC
1776625439	0 Count	24 Count	0 Count	0 VDC	0 VDC
1776621839	0 Count	24 Count	0 Count	0 VDC	0 VDC
1776620038	0 Count	24 Count	0 Count	0 VDC	0 VDC
1776618238	0 Count	24 Count	0 Count	0 VDC	0 VDC
1776616438	0 Count	24 Count	0 Count	0 VDC	0 VDC
1776614638	0 Count	24 Count	0 Count	0 VDC	0 VDC
1776612838	0 Count	24 Count	0 Count	0 VDC	0 VDC
1776611038	0 Count	24 Count	0 Count	0 VDC	0 VDC
1776609238	0 Count	24 Count	0 Count	0 VDC	0 VDC
1776607438	0 Count	24 Count	0 Count	0 VDC	0 VDC
1776605640	0 Count	24 Count	0 Count	0 VDC	0 VDC
1776603838	0 Count	24 Count	0 Count	0 VDC	0 VDC
1776602038	0 Count	24 Count	0 Count	0 VDC	0 VDC
1776600238	0 Count	24 Count	0 Count	0 VDC	0 VDC
1776598438	0 Count	24 Count	0 Count	0 VDC	0 VDC
1776596638	0 Count	24 Count	0 Count	0 VDC	0 VDC
1776594838	0 Count	24 Count	0 Count	0 VDC	0 VDC
1776593038	0 Count	24 Count	0 Count	0 VDC	0 VDC
1776591238	0 Count	24 Count	0 Count	0 VDC	0 VDC
1776589438	0 Count	24 Count	0 Count	0 VDC	0 VDC
1776587638	0 Count	24 Count	0 Count	0 VDC	0 VDC
1776585838	0 Count	24 Count	0 Count	0 VDC	0 VDC
1776584038	0 Count	24 Count	0 Count	0 VDC	0 VDC
1776582238	0 Count	24 Count	0 Count	0 VDC	0 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)