IR3ZWX Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR3ZWX. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	ARDUINO*	AMPER*	BATTERIE*	Temp_ext*
1784675158	5.1 Volt	-11.33 Amp.	13.6 Volt	14.25 GrdC
1784674551	5.1 Volt	-11.33 Amp.	13.6 Volt	14.25 GrdC
1784673950	5.1 Volt	-11.33 Amp.	13.6 Volt	14.5 GrdC
1784673342	5.1 Volt	-11.33 Amp.	13.6 Volt	14.5 GrdC
1784672741	5.1 Volt	-11.33 Amp.	13.6 Volt	14.5 GrdC
1784672135	5.1 Volt	-11.33 Amp.	13.6 Volt	14.75 GrdC
1784671534	5.1 Volt	-11.33 Amp.	13.6 Volt	14.75 GrdC
1784670926	5.1 Volt	-11.33 Amp.	13.6 Volt	15 GrdC
1784670324	5.1 Volt	-11.33 Amp.	13.6 Volt	15 GrdC
1784669718	5.1 Volt	-11.33 Amp.	13.6 Volt	15.25 GrdC
1784669116	5.1 Volt	-11.33 Amp.	13.6 Volt	15.25 GrdC
1784667908	5.1 Volt	-11.33 Amp.	13.6 Volt	15.5 GrdC
1784667300	5.1 Volt	-11.33 Amp.	13.6 Volt	15.5 GrdC
1784666701	5.1 Volt	-11.33 Amp.	13.6 Volt	15.75 GrdC
1784666094	5.1 Volt	-11.33 Amp.	13.6 Volt	15.75 GrdC
1784665492	5.1 Volt	-11.33 Amp.	13.5 Volt	15.75 GrdC
1784664285	5.1 Volt	-11.33 Amp.	13.6 Volt	15.75 GrdC
1784663677	5.1 Volt	-11.33 Amp.	13.6 Volt	15.75 GrdC
1784663076	5.1 Volt	-11.33 Amp.	13.6 Volt	16 GrdC
1784662468	5.1 Volt	-11.33 Amp.	13.6 Volt	16.25 GrdC
1784661867	5.1 Volt	-11.33 Amp.	13.6 Volt	16.25 GrdC
1784661259	5.1 Volt	-11.33 Amp.	13.6 Volt	16.5 GrdC
1784660657	5.1 Volt	-11.33 Amp.	13.6 Volt	16.5 GrdC
1784660052	5.1 Volt	-11.33 Amp.	13.6 Volt	16.75 GrdC
1784659450	5.1 Volt	-11.33 Amp.	13.6 Volt	16.75 GrdC

*Used Equation Coefficients:

ARDUINO: 0, 0.1, 0

AMPER: 0, 0.1452, -18.59

BATTERIE: 0, 0.1, 0

Temp_radio: 0, 0.25, -20.5

Temp_ext: 0, 0.25, -20.5

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)