9M4GDD Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9M4GDD. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1754036559	7 Pkt	10 Pkt	67 Pkt	-57 dBm	18.79 V
1754032936	4 Pkt	12 Pkt	22 Pkt	-57 dBm	18.79 V
1754029314	4 Pkt	12 Pkt	26 Pkt	-57 dBm	18.79 V
1754025692	4 Pkt	11 Pkt	20 Pkt	-61 dBm	18.79 V
1754022070	4 Pkt	14 Pkt	23 Pkt	-57 dBm	18.79 V
1754018447	4 Pkt	11 Pkt	18 Pkt	-57 dBm	18.81 V
1754014825	4 Pkt	12 Pkt	18 Pkt	-56 dBm	18.81 V
1754011203	3 Pkt	22 Pkt	19 Pkt	-55 dBm	18.79 V
1754007620	4 Pkt	39 Pkt	21 Pkt	-55 dBm	18.79 V
1754003957	4 Pkt	43 Pkt	15 Pkt	-56 dBm	18.79 V
1754000334	4 Pkt	31 Pkt	21 Pkt	-56 dBm	17.53 V
1753996711	4 Pkt	33 Pkt	18 Pkt	-56 dBm	18.81 V
1753993088	4 Pkt	33 Pkt	13 Pkt	-56 dBm	18.81 V
1753989465	4 Pkt	24 Pkt	18 Pkt	-54 dBm	18.79 V
1753985841	4 Pkt	39 Pkt	20 Pkt	-56 dBm	18.81 V
1753982218	4 Pkt	52 Pkt	22 Pkt	-58 dBm	18.79 V
1753978595	0 Pkt	0 Pkt	1 Pkt	-56 dBm	18.81 V
1753974183	4 Pkt	46 Pkt	29 Pkt	-58 dBm	18.79 V
1753970590	4 Pkt	89 Pkt	18 Pkt	-56 dBm	18.81 V
1753966136	0 Pkt	1 Pkt	1 Pkt	-56 dBm	18.81 V
1753962725	4 Pkt	37 Pkt	41 Pkt	-56 dBm	18.79 V
1753959100	4 Pkt	46 Pkt	51 Pkt	-56 dBm	18.79 V
1753954535	7 Pkt	33 Pkt	34 Pkt	-57 dBm	18.79 V
1753950887	4 Pkt	23 Pkt	39 Pkt	-57 dBm	18.76 V
1753947265	4 Pkt	20 Pkt	60 Pkt	-55 dBm	18.81 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)