W7FEL-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W7FEL-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1778202611	13.95 Volt	310 Pkt	170 Pkt	82 Pcnt
1778201411	13.95 Volt	320 Pkt	180 Pkt	84 Pcnt
1778200811	13.95 Volt	320 Pkt	180 Pkt	84 Pcnt
1778200211	13.95 Volt	310 Pkt	180 Pkt	85 Pcnt
1778199611	13.95 Volt	320 Pkt	180 Pkt	85 Pcnt
1778199011	13.95 Volt	320 Pkt	190 Pkt	86 Pcnt
1778197811	14.03 Volt	330 Pkt	200 Pkt	84 Pcnt
1778197212	14.03 Volt	340 Pkt	220 Pkt	84 Pcnt
1778196612	14.03 Volt	370 Pkt	240 Pkt	84 Pcnt
1778196012	14.03 Volt	380 Pkt	250 Pkt	82 Pcnt
1778195432	13.95 Volt	380 Pkt	240 Pkt	80 Pcnt
1778194813	13.95 Volt	380 Pkt	240 Pkt	80 Pcnt
1778194212	13.95 Volt	390 Pkt	240 Pkt	82 Pcnt
1778193612	13.95 Volt	380 Pkt	220 Pkt	83 Pcnt
1778193012	13.95 Volt	380 Pkt	230 Pkt	84 Pcnt
1778192412	13.8 Volt	390 Pkt	230 Pkt	85 Pcnt
1778191812	13.88 Volt	390 Pkt	230 Pkt	86 Pcnt
1778191212	14.03 Volt	390 Pkt	220 Pkt	88 Pcnt
1778190612	14.03 Volt	380 Pkt	210 Pkt	85 Pcnt
1778190012	14.03 Volt	380 Pkt	220 Pkt	85 Pcnt
1778189412	13.95 Volt	390 Pkt	220 Pkt	86 Pcnt
1778188812	14.03 Volt	380 Pkt	220 Pkt	86 Pcnt
1778188213	14.1 Volt	370 Pkt	220 Pkt	87 Pcnt
1778187612	14.03 Volt	360 Pkt	220 Pkt	86 Pcnt
1778187012	14.1 Volt	360 Pkt	220 Pkt	88 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)