XE2XEH Telemetry

This is the latest recevied telemetry packets stored in our database for station/object XE2XEH. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	CPU*	Mem*	WiFi*
1784696103	63 C	44.69 %	72.91 %	100 dBm
1784695203	65 C	29.79 %	72.91 %	100 dBm
1784694603	61 C	11.76 %	72.91 %	100 dBm
1784694003	62 C	39.98 %	72.91 %	100 dBm
1784693708	64 C	36.85 %	72.91 %	100 dBm
1784693403	61 C	12.94 %	71.74 %	100 dBm
1784693103	52 C	44.69 %	71.74 %	100 dBm
1784692803	60 C	27.83 %	71.74 %	100 dBm
1784691903	66 C	15.68 %	71.74 %	100 dBm
1784691003	69 C	19.99 %	71.74 %	100 dBm
1784690703	67 C	30.97 %	72.91 %	100 dBm
1784690103	61 C	8.62 %	72.91 %	100 dBm
1784689803	54 C	8.62 %	72.91 %	100 dBm
1784689503	67 C	7.84 %	74.87 %	100 dBm
1784688603	67 C	34.89 %	74.87 %	100 dBm
1784688304	66 C	37.63 %	74.87 %	100 dBm
1784687703	64 C	8.62 %	73.7 %	100 dBm
1784686813	61 C	41.94 %	73.7 %	100 dBm
1784686203	61 C	21.95 %	73.7 %	100 dBm
1784685603	58 C	66.64 %	72.91 %	100 dBm
1784685304	66 C	4.7 %	71.74 %	100 dBm
1784685003	66 C	8.62 %	71.74 %	100 dBm
1784684404	87 C	99.96 %	74.87 %	100 dBm
1784684103	47 C	7.84 %	69.78 %	100 dBm
1784683803	62 C	26.66 %	69.78 %	100 dBm

*Used Equation Coefficients:

Temp: 0, 0.1, 0

CPU: 0, 0.392, 0

Mem: 0, 0.392, 0

WiFi: 0, -0.392, 100

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)