9W2XRI-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9W2XRI-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1780456592	8 Pkt	12 Pkt	2 Pkt	-57 dBm	5.02 V
1780455364	13 Pkt	12 Pkt	0 Pkt	-59 dBm	5.02 V
1780454135	11 Pkt	10 Pkt	0 Pkt	-60 dBm	5.02 V
1780452908	6 Pkt	8 Pkt	0 Pkt	-58 dBm	5.04 V
1780451681	12 Pkt	8 Pkt	0 Pkt	-57 dBm	5.02 V
1780450452	13 Pkt	1 Pkt	0 Pkt	-58 dBm	5.02 V
1780449225	0 Pkt	0 Pkt	0 Pkt	-57 dBm	5.02 V
1780447931	54 Pkt	8 Pkt	0 Pkt	-60 dBm	5.02 V
1780446700	21 Pkt	9 Pkt	2 Pkt	-57 dBm	5.04 V
1780445473	44 Pkt	9 Pkt	2 Pkt	-63 dBm	5.04 V
1780444243	27 Pkt	10 Pkt	1 Pkt	-59 dBm	5.04 V
1780443013	13 Pkt	11 Pkt	1 Pkt	-58 dBm	5.02 V
1780441785	16 Pkt	11 Pkt	1 Pkt	-58 dBm	5.02 V
1780440556	8 Pkt	11 Pkt	1 Pkt	-57 dBm	5.02 V
1780439331	8 Pkt	11 Pkt	1 Pkt	-57 dBm	5.04 V
1780438103	9 Pkt	14 Pkt	2 Pkt	-58 dBm	5.04 V
1780436875	4 Pkt	10 Pkt	0 Pkt	-58 dBm	5.04 V
1780435649	5 Pkt	12 Pkt	0 Pkt	-57 dBm	5.04 V
1780434423	5 Pkt	11 Pkt	0 Pkt	-57 dBm	5.04 V
1780433196	18 Pkt	11 Pkt	3 Pkt	-59 dBm	5.02 V
1780431967	12 Pkt	7 Pkt	2 Pkt	-58 dBm	5.04 V
1780429592	14 Pkt	13 Pkt	0 Pkt	-57 dBm	5.04 V
1780428361	20 Pkt	9 Pkt	0 Pkt	-58 dBm	5.04 V
1780427132	22 Pkt	6 Pkt	0 Pkt	-58 dBm	5.02 V
1780425903	5 Pkt	0 Pkt	0 Pkt	-57 dBm	5.04 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)