TA1F-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA1F-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1757602165	18 Pkt	8 Pkt	13 Pkt	-38 dBm	0.57 V
1757601801	19 Pkt	16 Pkt	10 Pkt	-39 dBm	0.45 V
1757601436	27 Pkt	10 Pkt	15 Pkt	-39 dBm	0.51 V
1757601071	22 Pkt	11 Pkt	18 Pkt	-40 dBm	0.55 V
1757600707	26 Pkt	9 Pkt	10 Pkt	-39 dBm	0.53 V
1757600342	20 Pkt	5 Pkt	16 Pkt	-38 dBm	0.57 V
1757599978	5 Pkt	1 Pkt	5 Pkt	-38 dBm	0.51 V
1757599511	19 Pkt	24 Pkt	9 Pkt	-39 dBm	0.55 V
1757599146	30 Pkt	10 Pkt	12 Pkt	-39 dBm	0.45 V
1757598417	22 Pkt	16 Pkt	16 Pkt	-37 dBm	0.55 V
1757597688	21 Pkt	20 Pkt	10 Pkt	-39 dBm	0.53 V
1757597323	24 Pkt	9 Pkt	18 Pkt	-39 dBm	0.45 V
1757596959	26 Pkt	24 Pkt	13 Pkt	-41 dBm	0.41 V
1757596595	22 Pkt	7 Pkt	13 Pkt	-45 dBm	0.51 V
1757596230	20 Pkt	18 Pkt	13 Pkt	-39 dBm	0.51 V
1757595866	30 Pkt	9 Pkt	12 Pkt	-44 dBm	0.51 V
1757595501	22 Pkt	18 Pkt	15 Pkt	-39 dBm	0.74 V
1757595137	23 Pkt	9 Pkt	12 Pkt	-39 dBm	0.49 V
1757594772	21 Pkt	7 Pkt	16 Pkt	-38 dBm	0.49 V
1757594408	23 Pkt	5 Pkt	12 Pkt	-40 dBm	0.45 V
1757594043	4 Pkt	1 Pkt	3 Pkt	-40 dBm	0.49 V
1757593445	25 Pkt	14 Pkt	12 Pkt	-38 dBm	0.49 V
1757593081	24 Pkt	12 Pkt	13 Pkt	-39 dBm	0.59 V
1757592716	19 Pkt	19 Pkt	12 Pkt	-39 dBm	0.43 V
1757592351	23 Pkt	15 Pkt	12 Pkt	-38 dBm	0.45 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)