This is the latest recevied telemetry packets stored in our database for station/object W4DMM-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Avg 10m* | Avg 10m* | RxPkts* | IGateDropRx* | TxPkts* |
|---|---|---|---|---|---|
| 1749438765 | 0.15 Rx Erlang | 0.05 Tx Erlang | 147 count/10m | 100 count/10m | 40 count/10m |
| 1749437565 | 0.16 Rx Erlang | 0.05 Tx Erlang | 138 count/10m | 90 count/10m | 36 count/10m |
| 1749436372 | 0.16 Rx Erlang | 0.05 Tx Erlang | 138 count/10m | 91 count/10m | 37 count/10m |
| 1749435165 | 0.16 Rx Erlang | 0.04 Tx Erlang | 159 count/10m | 37 count/10m | 39 count/10m |
| 1749433965 | 0.12 Rx Erlang | 0.03 Tx Erlang | 101 count/10m | 9 count/10m | 27 count/10m |
| 1749431565 | 0.16 Rx Erlang | 0.05 Tx Erlang | 138 count/10m | 90 count/10m | 35 count/10m |
| 1749430365 | 0.13 Rx Erlang | 0.04 Tx Erlang | 130 count/10m | 83 count/10m | 36 count/10m |
| 1749429165 | 0.13 Rx Erlang | 0.04 Tx Erlang | 130 count/10m | 82 count/10m | 35 count/10m |
| 1749427965 | 0.17 Rx Erlang | 0.05 Tx Erlang | 147 count/10m | 99 count/10m | 38 count/10m |
| 1749426765 | 0.14 Rx Erlang | 0.04 Tx Erlang | 141 count/10m | 95 count/10m | 43 count/10m |
| 1749425565 | 0.15 Rx Erlang | 0.05 Tx Erlang | 163 count/10m | 114 count/10m | 48 count/10m |
| 1749424365 | 0.15 Rx Erlang | 0.04 Tx Erlang | 152 count/10m | 104 count/10m | 41 count/10m |
| 1749423165 | 0.14 Rx Erlang | 0.04 Tx Erlang | 146 count/10m | 98 count/10m | 39 count/10m |
| 1749421965 | 0.16 Rx Erlang | 0.05 Tx Erlang | 162 count/10m | 114 count/10m | 43 count/10m |
| 1749420765 | 0.16 Rx Erlang | 0.05 Tx Erlang | 157 count/10m | 110 count/10m | 46 count/10m |
| 1749419565 | 0.19 Rx Erlang | 0.05 Tx Erlang | 190 count/10m | 142 count/10m | 57 count/10m |
| 1749418365 | 0.22 Rx Erlang | 0.07 Tx Erlang | 218 count/10m | 170 count/10m | 70 count/10m |
| 1749417166 | 0.18 Rx Erlang | 0.06 Tx Erlang | 187 count/10m | 138 count/10m | 55 count/10m |
| 1749415965 | 0.21 Rx Erlang | 0.07 Tx Erlang | 197 count/10m | 149 count/10m | 61 count/10m |
| 1749413565 | 0.17 Rx Erlang | 0.04 Tx Erlang | 163 count/10m | 116 count/10m | 44 count/10m |
| 1749412365 | 0.19 Rx Erlang | 0.06 Tx Erlang | 187 count/10m | 139 count/10m | 59 count/10m |
| 1749411165 | 0.19 Rx Erlang | 0.06 Tx Erlang | 199 count/10m | 150 count/10m | 61 count/10m |
| 1749409966 | 0.18 Rx Erlang | 0.05 Tx Erlang | 179 count/10m | 131 count/10m | 50 count/10m |
| 1749408765 | 0.22 Rx Erlang | 0.06 Tx Erlang | 220 count/10m | 171 count/10m | 64 count/10m |
| 1749407565 | 0.24 Rx Erlang | 0.07 Tx Erlang | 216 count/10m | 168 count/10m | 60 count/10m |
*Used Equation Coefficients:
Avg 10m: 0, 0.005, 0
Avg 10m: 0, 0.005, 0
RxPkts: 0, 1, 0
IGateDropRx: 0, 1, 0
TxPkts: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)