VA7BLD-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VA7BLD-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Value1*	Value2*	Value3*	Value4*	Value5*
1757223083	22	33	34	29	21
1757147486	22	32	31	28	20
1757143886	22	31	31	27	20
1757142087	22	32	31	26	19
1757134887	22	31	31	26	19
1757131287	22	31	31	26	19
1757073689	22	32	32	28	20
1757071890	22	32	33	28	21
1757070090	22	32	33	28	21
1757068290	22	32	31	27	19
1757064690	22	32	31	27	19
1757062890	22	33	33	28	21
1757053890	22	33	33	28	21
1757050291	22	32	31	28	20
1757043091	22	31	31	27	20
1757030491	22	30	31	26	20
1756992693	22	32	32	28	20
1756985494	22	32	33	28	21
1756983694	22	32	31	28	20
1756981894	22	31	31	26	19
1756978294	22	31	31	26	19
1756972894	22	32	31	26	19
1756924299	22	31	31	26	20
1756920696	22	31	31	26	19
1756917097	22	32	31	26	20

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)