SV1BYK-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SV1BYK-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1772685766	12.9 Volt	70 Pkt	20 Pkt	48 Pcnt
1772685469	13.05 Volt	60 Pkt	20 Pkt	50 Pcnt
1772685466	13.05 Volt	60 Pkt	20 Pkt	50 Pcnt
1772685166	13.05 Volt	70 Pkt	20 Pkt	54 Pcnt
1772684867	13.5 Volt	70 Pkt	20 Pkt	59 Pcnt
1772684866	13.5 Volt	70 Pkt	20 Pkt	59 Pcnt
1772684566	13.65 Volt	70 Pkt	20 Pkt	60 Pcnt
1772684268	13.73 Volt	60 Pkt	20 Pkt	65 Pcnt
1772684266	13.73 Volt	60 Pkt	20 Pkt	65 Pcnt
1772683966	13.73 Volt	70 Pkt	20 Pkt	68 Pcnt
1772683667	13.73 Volt	60 Pkt	20 Pkt	73 Pcnt
1772683666	13.73 Volt	60 Pkt	20 Pkt	73 Pcnt
1772683366	13.73 Volt	60 Pkt	20 Pkt	70 Pcnt
1772683067	13.73 Volt	60 Pkt	10 Pkt	74 Pcnt
1772683066	13.73 Volt	60 Pkt	10 Pkt	74 Pcnt
1772682766	13.73 Volt	60 Pkt	10 Pkt	73 Pcnt
1772682467	13.73 Volt	50 Pkt	10 Pkt	72 Pcnt
1772682466	13.73 Volt	50 Pkt	10 Pkt	72 Pcnt
1772682166	13.73 Volt	50 Pkt	10 Pkt	71 Pcnt
1772681868	13.73 Volt	50 Pkt	10 Pkt	76 Pcnt
1772681868	13.73 Volt	50 Pkt	10 Pkt	76 Pcnt
1772681566	13.73 Volt	40 Pkt	10 Pkt	71 Pcnt
1772681267	13.73 Volt	50 Pkt	10 Pkt	75 Pcnt
1772681266	13.73 Volt	50 Pkt	10 Pkt	75 Pcnt
1772680966	13.73 Volt	50 Pkt	10 Pkt	73 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)