YM2VTC Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YM2VTC. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1788666909	66 Pkt	9 Pkt	1 Pkt	-83 dBm	0.14 V
1788666179	56 Pkt	8 Pkt	3 Pkt	-83 dBm	0.14 V
1788665449	70 Pkt	9 Pkt	1 Pkt	-84 dBm	0.14 V
1788664719	51 Pkt	7 Pkt	1 Pkt	-84 dBm	0.14 V
1788663989	51 Pkt	4 Pkt	1 Pkt	-83 dBm	0.14 V
1788663259	9 Pkt	0 Pkt	0 Pkt	-82 dBm	0.14 V
1788663141	58 Pkt	11 Pkt	1 Pkt	-84 dBm	0.14 V
1788662411	54 Pkt	6 Pkt	2 Pkt	-84 dBm	0.14 V
1788661681	62 Pkt	8 Pkt	1 Pkt	-83 dBm	0.14 V
1788660951	46 Pkt	5 Pkt	1 Pkt	-84 dBm	0.14 V
1788660221	54 Pkt	8 Pkt	0 Pkt	-84 dBm	0.14 V
1788659491	54 Pkt	8 Pkt	1 Pkt	-84 dBm	0.14 V
1788658761	61 Pkt	7 Pkt	6 Pkt	-82 dBm	0.14 V
1788658031	71 Pkt	2 Pkt	10 Pkt	-84 dBm	0.14 V
1788657301	2 Pkt	0 Pkt	2 Pkt	-84 dBm	0.14 V
1788656907	69 Pkt	9 Pkt	6 Pkt	-84 dBm	0.14 V
1788656177	52 Pkt	7 Pkt	3 Pkt	-83 dBm	0.14 V
1788655447	63 Pkt	8 Pkt	2 Pkt	-84 dBm	0.14 V
1788654717	45 Pkt	5 Pkt	0 Pkt	-83 dBm	0.14 V
1788653987	62 Pkt	7 Pkt	1 Pkt	-83 dBm	0.14 V
1788653257	56 Pkt	10 Pkt	1 Pkt	-82 dBm	0.14 V
1788652527	62 Pkt	8 Pkt	0 Pkt	-83 dBm	0.14 V
1788651797	73 Pkt	8 Pkt	2 Pkt	-84 dBm	0.14 V
1788651067	73 Pkt	9 Pkt	1 Pkt	-84 dBm	0.14 V
1788650337	70 Pkt	10 Pkt	1 Pkt	-83 dBm	0.14 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)