EL-UB6LSU Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EL-UB6LSU. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*
1785315324	0 RX Erlang	11 TX Erlang	0 RXcount/10m	2 TXcount/10m
1785314724	0 RX Erlang	143 TX Erlang	0 RXcount/10m	9 TXcount/10m
1785314124	0 RX Erlang	30 TX Erlang	0 RXcount/10m	4 TXcount/10m
1785313524	0 RX Erlang	2 TX Erlang	0 RXcount/10m	1 TXcount/10m
1785312924	0 RX Erlang	10 TX Erlang	0 RXcount/10m	2 TXcount/10m
1785312324	0 RX Erlang	61 TX Erlang	0 RXcount/10m	4 TXcount/10m
1785311724	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1785311124	0 RX Erlang	64 TX Erlang	0 RXcount/10m	5 TXcount/10m
1785310524	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1785309924	0 RX Erlang	12 TX Erlang	0 RXcount/10m	3 TXcount/10m
1785309324	0 RX Erlang	8 TX Erlang	0 RXcount/10m	1 TXcount/10m
1785308724	0 RX Erlang	27 TX Erlang	0 RXcount/10m	2 TXcount/10m
1785308124	0 RX Erlang	42 TX Erlang	0 RXcount/10m	7 TXcount/10m
1785307524	0 RX Erlang	375 TX Erlang	0 RXcount/10m	13 TXcount/10m
1785306924	0 RX Erlang	535 TX Erlang	0 RXcount/10m	12 TXcount/10m
1785306324	0 RX Erlang	364 TX Erlang	0 RXcount/10m	7 TXcount/10m
1785305724	0 RX Erlang	367 TX Erlang	0 RXcount/10m	14 TXcount/10m
1785305124	0 RX Erlang	213 TX Erlang	0 RXcount/10m	12 TXcount/10m
1785304524	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1785303924	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1785303324	0 RX Erlang	65 TX Erlang	0 RXcount/10m	5 TXcount/10m
1785302724	1 RX Erlang	482 TX Erlang	1 RXcount/10m	25 TXcount/10m
1785302124	0 RX Erlang	34 TX Erlang	0 RXcount/10m	12 TXcount/10m
1785301524	0 RX Erlang	63 TX Erlang	0 RXcount/10m	7 TXcount/10m
1785300924	0 RX Erlang	40 TX Erlang	0 RXcount/10m	13 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)