OZ7CER-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OZ7CER-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1772645184	13.9 Volt	350 Pkt	100 Pkt	70 Pcnt
1772645181	13.9 Volt	350 Pkt	100 Pkt	70 Pcnt
1772644882	13.9 Volt	350 Pkt	100 Pkt	72 Pcnt
1772644881	13.9 Volt	350 Pkt	100 Pkt	72 Pcnt
1772644582	13.9 Volt	340 Pkt	110 Pkt	73 Pcnt
1772644581	13.9 Volt	340 Pkt	110 Pkt	73 Pcnt
1772644281	13.9 Volt	350 Pkt	100 Pkt	75 Pcnt
1772644281	13.9 Volt	350 Pkt	100 Pkt	75 Pcnt
1772643983	13.9 Volt	350 Pkt	100 Pkt	75 Pcnt
1772643980	13.9 Volt	350 Pkt	100 Pkt	75 Pcnt
1772643681	13.9 Volt	340 Pkt	100 Pkt	75 Pcnt
1772643680	13.9 Volt	340 Pkt	100 Pkt	75 Pcnt
1772643381	13.9 Volt	340 Pkt	100 Pkt	77 Pcnt
1772643380	13.9 Volt	340 Pkt	100 Pkt	77 Pcnt
1772643081	13.9 Volt	350 Pkt	110 Pkt	81 Pcnt
1772643079	13.9 Volt	350 Pkt	110 Pkt	81 Pcnt
1772642780	13.9 Volt	350 Pkt	110 Pkt	81 Pcnt
1772642779	13.9 Volt	350 Pkt	110 Pkt	81 Pcnt
1772642479	13.9 Volt	340 Pkt	120 Pkt	81 Pcnt
1772642479	13.9 Volt	340 Pkt	120 Pkt	81 Pcnt
1772642179	13.9 Volt	340 Pkt	120 Pkt	82 Pcnt
1772642178	13.9 Volt	340 Pkt	120 Pkt	82 Pcnt
1772641879	13.9 Volt	340 Pkt	120 Pkt	83 Pcnt
1772641878	13.9 Volt	340 Pkt	120 Pkt	83 Pcnt
1772641581	13.9 Volt	340 Pkt	120 Pkt	82 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)