This is the latest recevied telemetry packets stored in our database for station/object IR1UFB. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
Rx10m*
Rx1h*
Dg10m*
DgR*
Eff1h*
1780342608
92 Pkt
660 Pkt
0 Pkt
0.59 Pcnt
79 Pcnt
1780008365
90 Pkt
530 Pkt
0 Pkt
0.59 Pcnt
79 Pcnt
1780007757
76 Pkt
540 Pkt
0 Pkt
0.59 Pcnt
78 Pcnt
1780007156
88 Pkt
520 Pkt
0 Pkt
0.6 Pcnt
76 Pcnt
1780006856
71 Pkt
530 Pkt
0 Pkt
0.6 Pcnt
76 Pcnt
1779801459
117 Pkt
570 Pkt
0 Pkt
0.58 Pcnt
68 Pcnt
*Used Equation Coefficients:
Rx10m: 0, 1, 0
Rx1h: 0, 10, 0
Dg10m: 0, 1, 0
DgR: 0, 0.001, 0
Eff1h: 0, 1, 0
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)