BM5GSV-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BM5GSV-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	CPUTemp*	RxPkts/20m*	RxPkts/1h*	RxPkts/24h*	DiGi*
1776862309	53.1 C	32 p	70 p	999 p	870 p
1776861699	53.1 C	25 p	60 p	999 p	860 p
1776861099	53.1 C	22 p	51 p	999 p	856 p
1776860469	53.6 C	17 p	44 p	999 p	850 p
1776859809	53.1 C	17 p	39 p	999 p	849 p
1776859189	53.1 C	16 p	34 p	999 p	845 p
1776858549	54 C	11 p	31 p	999 p	838 p
1776857889	53.1 C	11 p	34 p	999 p	839 p
1776857279	53.1 C	9 p	39 p	999 p	838 p
1776856629	54 C	9 p	55 p	999 p	840 p
1776856019	54 C	12 p	75 p	999 p	842 p
1776855369	54 C	17 p	84 p	999 p	846 p
1776854739	53.6 C	20 p	91 p	999 p	850 p
1776854109	53.6 C	33 p	90 p	999 p	860 p
1776853449	54 C	47 p	102 p	999 p	876 p
1776852839	53.1 C	33 p	95 p	999 p	863 p
1776852189	54 C	19 p	87 p	999 p	856 p
1776851559	54.5 C	22 p	88 p	999 p	858 p
1776850929	53.6 C	35 p	85 p	999 p	862 p
1776850298	54 C	42 p	78 p	999 p	857 p
1776849669	55 C	32 p	66 p	999 p	851 p
1776849059	55 C	19 p	55 p	999 p	854 p
1776848409	54.5 C	16 p	50 p	999 p	864 p
1776847808	54 C	16 p	63 p	999 p	869 p
1776847198	55 C	17 p	79 p	999 p	873 p

*Used Equation Coefficients:

CPUTemp: 0, 0.1, 0

RxPkts/20m: 0, 1, 0

RxPkts/1h: 0, 1, 0

RxPkts/24h: 0, 1, 0

DiGi: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)