DL0BAS-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL0BAS-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1776655280	1004.3 hPa	7.8 C deg	100 %	1013.2 hPa	0 C deg
1776651655	1004.5 hPa	7.9 C deg	100 %	1013.4 hPa	0 C deg
1776649843	1004.5 hPa	8 C deg	100 %	1013.5 hPa	0 C deg
1776648028	1004.6 hPa	8.1 C deg	100 %	1013.5 hPa	0 C deg
1776646202	1004.6 hPa	8.2 C deg	100 %	1013.5 hPa	0 C deg
1776644390	1004.7 hPa	8.3 C deg	100 %	1013.6 hPa	0 C deg
1776642576	1004.9 hPa	8.3 C deg	100 %	1013.8 hPa	0 C deg
1776640760	1005 hPa	8.4 C deg	100 %	1013.9 hPa	0 C deg
1776638943	1005.2 hPa	8.6 C deg	100 %	1014.1 hPa	0 C deg
1776637129	1005.1 hPa	8.6 C deg	100 %	1014 hPa	0 C deg
1776635311	1005.3 hPa	8.7 C deg	100 %	1014.2 hPa	0 C deg
1776633499	1005.3 hPa	8.9 C deg	100 %	1014.2 hPa	0 C deg
1776631681	1005.4 hPa	9 C deg	100 %	1014.3 hPa	0 C deg
1776628055	1006 hPa	9.3 C deg	100 %	1014.8 hPa	0 C deg
1776626239	1005.8 hPa	9.5 C deg	100 %	1014.7 hPa	0 C deg
1776624425	1005.4 hPa	9.8 C deg	100 %	1014.3 hPa	0 C deg
1776622609	1005.4 hPa	10.1 C deg	100 %	1014.3 hPa	0 C deg
1776620793	1005.2 hPa	10.5 C deg	100 %	1014.1 hPa	0 C deg
1776618978	1005.3 hPa	11 C deg	100 %	1014.1 hPa	0 C deg
1776617163	1005.2 hPa	11.6 C deg	100 %	1014.1 hPa	0 C deg
1776615349	1005.7 hPa	12.3 C deg	100 %	1014.4 hPa	0 C deg
1776613533	1005.7 hPa	12.9 C deg	100 %	1014.5 hPa	0 C deg
1776611719	1005.4 hPa	13.6 C deg	100 %	1014.2 hPa	0 C deg
1776609904	1005 hPa	14.3 C deg	100 %	1013.8 hPa	0 C deg
1776606271	1004.8 hPa	15.9 C deg	97.7 %	1013.5 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)