2E0TOY Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 2E0TOY. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Rx10m*	Eff*	Eff1h*
1781369959	15.08 V	40 pkt	12 pkt	97 %	97 %
1781369359	15.08 V	20 pkt	23 pkt	100 %	96 %
1781368454	15.08 V	140 pkt	18 pkt	97 %	97 %
1781367854	15.08 V	160 pkt	19 pkt	97 %	97 %
1781367254	15.08 V	160 pkt	26 pkt	97 %	97 %
1781366654	15.08 V	130 pkt	19 pkt	97 %	97 %
1781366054	15.08 V	100 pkt	28 pkt	98 %	98 %
1781365454	15.08 V	70 pkt	19 pkt	97 %	97 %
1781364854	15.08 V	50 pkt	26 pkt	98 %	98 %
1781364254	15.08 V	20 pkt	23 pkt	96 %	92 %
1781362281	15.08 V	20 pkt	19 pkt	100 %	100 %
1781361317	15.08 V	20 pkt	19 pkt	100 %	100 %
1781360351	15.08 V	20 pkt	22 pkt	96 %	96 %
1781358549	15.08 V	80 pkt	30 pkt	95 %	93 %
1781357949	15.08 V	50 pkt	20 pkt	98 %	98 %
1781357349	15.08 V	30 pkt	31 pkt	97 %	100 %
1781356441	15.08 V	200 pkt	36 pkt	96 %	97 %
1781355841	15.08 V	190 pkt	27 pkt	96 %	97 %
1781355241	15.08 V	200 pkt	33 pkt	96 %	95 %
1781354641	15.08 V	210 pkt	26 pkt	96 %	95 %
1781354041	15.08 V	210 pkt	24 pkt	96 %	95 %
1781353441	15.08 V	210 pkt	32 pkt	96 %	95 %
1781352841	15.08 V	180 pkt	33 pkt	96 %	96 %
1781352241	15.08 V	140 pkt	35 pkt	94 %	95 %
1781351641	15.08 V	100 pkt	37 pkt	98 %	98 %

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Rx10m: 0, 1, 0

Eff: 0, 1, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)