VK7RMD Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK7RMD. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Eff*
1780803785	13.88 Volt	330 Pkt	120 Pkt	91 Pcnt	88 Pcnt
1780803245	13.88 Volt	320 Pkt	110 Pkt	91 Pcnt	88 Pcnt
1780802704	13.88 Volt	320 Pkt	110 Pkt	90 Pcnt	88 Pcnt
1780802164	13.88 Volt	330 Pkt	120 Pkt	91 Pcnt	88 Pcnt
1780801623	13.88 Volt	340 Pkt	120 Pkt	90 Pcnt	88 Pcnt
1780801083	13.8 Volt	330 Pkt	120 Pkt	89 Pcnt	88 Pcnt
1780800542	13.88 Volt	320 Pkt	120 Pkt	89 Pcnt	88 Pcnt
1780800002	13.88 Volt	310 Pkt	110 Pkt	88 Pcnt	88 Pcnt
1780799461	13.88 Volt	320 Pkt	120 Pkt	88 Pcnt	88 Pcnt
1780798921	13.88 Volt	320 Pkt	120 Pkt	87 Pcnt	88 Pcnt
1780798380	13.88 Volt	310 Pkt	110 Pkt	86 Pcnt	88 Pcnt
1780797839	13.88 Volt	300 Pkt	110 Pkt	87 Pcnt	88 Pcnt
1780797299	13.88 Volt	290 Pkt	100 Pkt	87 Pcnt	88 Pcnt
1780796759	13.8 Volt	280 Pkt	100 Pkt	88 Pcnt	88 Pcnt
1780796218	13.88 Volt	280 Pkt	100 Pkt	89 Pcnt	88 Pcnt
1780795677	13.88 Volt	270 Pkt	100 Pkt	89 Pcnt	88 Pcnt
1780795137	13.88 Volt	280 Pkt	100 Pkt	90 Pcnt	88 Pcnt
1780794596	13.8 Volt	270 Pkt	100 Pkt	90 Pcnt	88 Pcnt
1780794060	13.88 Volt	270 Pkt	100 Pkt	89 Pcnt	88 Pcnt
1780793515	13.88 Volt	260 Pkt	100 Pkt	89 Pcnt	88 Pcnt
1780792975	13.88 Volt	270 Pkt	100 Pkt	89 Pcnt	88 Pcnt
1780792434	13.88 Volt	260 Pkt	90 Pkt	89 Pcnt	88 Pcnt
1780791894	13.88 Volt	270 Pkt	100 Pkt	90 Pcnt	88 Pcnt
1780791353	14.1 Volt	270 Pkt	100 Pkt	92 Pcnt	88 Pcnt
1780790813	14.55 Volt	290 Pkt	100 Pkt	92 Pcnt	88 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)