KA9GAP-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KA9GAP-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Temp*
1776856991	14.18 Volt	700 Pkt	87 Pcnt	16.5 C
1776856691	14.18 Volt	690 Pkt	87 Pcnt	16.5 C
1776856391	14.18 Volt	680 Pkt	85 Pcnt	16.5 C
1776856091	14.18 Volt	680 Pkt	85 Pcnt	16.5 C
1776855791	14.18 Volt	660 Pkt	85 Pcnt	16.5 C
1776855491	14.18 Volt	630 Pkt	85 Pcnt	16.5 C
1776855191	14.18 Volt	630 Pkt	85 Pcnt	16.5 C
1776854891	14.18 Volt	620 Pkt	85 Pcnt	16.5 C
1776854591	14.18 Volt	620 Pkt	84 Pcnt	16.5 C
1776854291	14.18 Volt	610 Pkt	83 Pcnt	16.5 C
1776853991	14.18 Volt	600 Pkt	83 Pcnt	16.5 C
1776853691	14.18 Volt	590 Pkt	83 Pcnt	16.5 C
1776853391	14.18 Volt	590 Pkt	83 Pcnt	16.5 C
1776853091	14.18 Volt	590 Pkt	83 Pcnt	16.5 C
1776852791	14.18 Volt	590 Pkt	85 Pcnt	16.5 C
1776852500	14.18 Volt	580 Pkt	84 Pcnt	16.5 C
1776852191	14.18 Volt	580 Pkt	84 Pcnt	16.5 C
1776851891	14.18 Volt	570 Pkt	85 Pcnt	16.5 C
1776851591	14.18 Volt	560 Pkt	86 Pcnt	16.5 C
1776851291	14.18 Volt	570 Pkt	85 Pcnt	16.5 C
1776850991	14.18 Volt	560 Pkt	86 Pcnt	16.5 C
1776850691	14.18 Volt	550 Pkt	86 Pcnt	17 C
1776850391	14.18 Volt	560 Pkt	87 Pcnt	17 C
1776850091	14.18 Volt	550 Pkt	88 Pcnt	17 C
1776849791	14.18 Volt	550 Pkt	88 Pcnt	17 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)