YM2VGT Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YM2VGT. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	APRS*	220V*	Temp*	Rx1h*	Eff*
1785277828	13.5 Volt	7.7 Volt	15.5 C	670 Pkt	72 Pcnt
1785277227	13.5 Volt	8 Volt	16 C	670 Pkt	72 Pcnt
1785276627	13.6 Volt	8 Volt	16 C	680 Pkt	72 Pcnt
1785276026	13.5 Volt	7.8 Volt	16 C	670 Pkt	72 Pcnt
1785275426	13.5 Volt	8 Volt	16 C	670 Pkt	72 Pcnt
1785274827	13.6 Volt	8 Volt	16 C	700 Pkt	72 Pcnt
1785274224	13.6 Volt	8 Volt	16.5 C	710 Pkt	72 Pcnt
1785273624	13.5 Volt	8 Volt	16.5 C	710 Pkt	72 Pcnt
1785273023	13.6 Volt	8 Volt	16.5 C	740 Pkt	72 Pcnt
1785272424	13.5 Volt	7.8 Volt	16.5 C	760 Pkt	72 Pcnt
1785271822	13.5 Volt	8 Volt	16.5 C	760 Pkt	72 Pcnt
1785271221	13.6 Volt	8 Volt	16.5 C	750 Pkt	72 Pcnt
1785270621	13.6 Volt	8 Volt	16.5 C	800 Pkt	72 Pcnt
1785270021	13.5 Volt	8 Volt	16.5 C	800 Pkt	72 Pcnt
1785269421	13.6 Volt	8 Volt	17 C	780 Pkt	72 Pcnt
1785268819	13.6 Volt	8 Volt	17 C	790 Pkt	72 Pcnt
1785268219	13.6 Volt	8 Volt	17 C	820 Pkt	72 Pcnt
1785267622	13.5 Volt	8 Volt	17 C	830 Pkt	72 Pcnt
1785267019	13.5 Volt	7.8 Volt	17 C	790 Pkt	72 Pcnt
1785266417	13.5 Volt	8 Volt	17 C	780 Pkt	72 Pcnt
1785265816	13.5 Volt	8 Volt	17 C	760 Pkt	72 Pcnt
1785265215	13.5 Volt	7.8 Volt	17.5 C	730 Pkt	72 Pcnt
1785264615	13.5 Volt	7.8 Volt	17.5 C	700 Pkt	72 Pcnt
1785264015	13.5 Volt	8 Volt	18 C	680 Pkt	72 Pcnt
1785263415	13.5 Volt	8 Volt	18.5 C	670 Pkt	72 Pcnt

*Used Equation Coefficients:

APRS: 0, 0.1, 0

220V: 0, 0.1, 0

Temp: 0, 0.5, -64

Rx1h: 0, 10, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)