DD3UTS-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DD3UTS-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery*	DrehWin*	BlitzD*	AkkuL*
1773086732	13.2 V	8 n/min	100 km	420 Wh
1773086432	13.2 V	20 n/min	100 km	420 Wh
1773086136	13.2 V	8 n/min	100 km	420 Wh
1773085832	13.2 V	44 n/min	100 km	420 Wh
1773085532	13.2 V	12 n/min	100 km	420 Wh
1773085232	13.2 V	4 n/min	100 km	420 Wh
1773084932	13.2 V	4 n/min	100 km	420 Wh
1773084632	13.2 V	8 n/min	100 km	420 Wh
1773084333	13.2 V	0 n/min	100 km	420 Wh
1773084032	13.2 V	0 n/min	100 km	420 Wh
1773083731	13.2 V	0 n/min	100 km	420 Wh
1773083434	13.2 V	0 n/min	100 km	420 Wh
1773083132	13.2 V	0 n/min	100 km	420 Wh
1773082832	13.2 V	0 n/min	100 km	420 Wh
1773082532	13.2 V	0 n/min	100 km	420 Wh
1773082232	13.2 V	0 n/min	100 km	420 Wh
1773081932	13.2 V	4 n/min	100 km	420 Wh
1773081632	13.2 V	0 n/min	100 km	420 Wh
1773081332	13.2 V	0 n/min	100 km	420 Wh
1773081032	13.2 V	8 n/min	100 km	420 Wh
1773080732	13.2 V	8 n/min	100 km	420 Wh
1773080431	13.2 V	4 n/min	100 km	420 Wh
1773080132	13.2 V	4 n/min	100 km	420 Wh
1773079832	13.2 V	0 n/min	100 km	420 Wh
1773079532	13.2 V	0 n/min	100 km	420 Wh

*Used Equation Coefficients:

Battery: 0, 0.075, 0

DrehWin: 0, 4, 0

SolarP: 0, 4, 0

BlitzD: 0, 1, 0

AkkuL: 0, 4, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)