SP0LPR-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP0LPR-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1761742811	46 Deg.C	2 %
1761741602	46 Deg.C	2 %
1761738005	45 Deg.C	2 %
1761735605	46 Deg.C	2 %
1761734405	46 Deg.C	2 %
1761732601	44 Deg.C	2 %
1761731405	45 Deg.C	2 %
1761730802	43 Deg.C	2 %
1761729601	44 Deg.C	2 %
1761727802	45 Deg.C	2 %
1761727205	45 Deg.C	2 %
1761724202	45 Deg.C	2 %
1761723602	45 Deg.C	2 %
1761723005	45 Deg.C	2 %
1761722401	44 Deg.C	2 %
1761721202	45 Deg.C	2 %
1761720605	45 Deg.C	2 %
1761720001	45 Deg.C	2 %
1761718201	43 Deg.C	2 %
1761715801	45 Deg.C	2 %
1761715202	45 Deg.C	2 %
1761714002	45 Deg.C	2 %
1761712801	45 Deg.C	2 %
1761711616	45 Deg.C	2 %
1761711002	45 Deg.C	2 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)