EA5GU-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EA5GU-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1776582618	0 Count	435 Count	0 Count	0 VDC	0 VDC
1776580818	0 Count	370 Count	0 Count	0 VDC	0 VDC
1776579018	0 Count	338 Count	0 Count	0 VDC	0 VDC
1776577220	0 Count	302 Count	0 Count	0 VDC	0 VDC
1776575420	0 Count	261 Count	0 Count	0 VDC	0 VDC
1776573620	0 Count	215 Count	0 Count	0 VDC	0 VDC
1776571819	0 Count	199 Count	0 Count	0 VDC	0 VDC
1776570019	0 Count	170 Count	0 Count	0 VDC	0 VDC
1776568219	0 Count	131 Count	0 Count	0 VDC	0 VDC
1776566419	0 Count	110 Count	0 Count	0 VDC	0 VDC
1776564619	0 Count	81 Count	0 Count	0 VDC	0 VDC
1776562819	0 Count	56 Count	0 Count	0 VDC	0 VDC
1776561019	0 Count	30 Count	0 Count	0 VDC	0 VDC
1776559219	0 Count	1032 Count	0 Count	0 VDC	0 VDC
1776557419	0 Count	997 Count	0 Count	0 VDC	0 VDC
1776555618	0 Count	971 Count	0 Count	0 VDC	0 VDC
1776553818	0 Count	952 Count	0 Count	0 VDC	0 VDC
1776552018	0 Count	924 Count	0 Count	0 VDC	0 VDC
1776550218	0 Count	889 Count	0 Count	0 VDC	0 VDC
1776548417	0 Count	865 Count	0 Count	0 VDC	0 VDC
1776546617	0 Count	851 Count	0 Count	0 VDC	0 VDC
1776544817	0 Count	838 Count	0 Count	0 VDC	0 VDC
1776543017	0 Count	828 Count	0 Count	0 VDC	0 VDC
1776541217	0 Count	813 Count	0 Count	0 VDC	0 VDC
1776539417	0 Count	799 Count	0 Count	0 VDC	0 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)