AE5TC-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object AE5TC-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1789946402	0.43 Load	67.68 DegC	330 Mb	2153 Pkt	170 Pkt
1789946102	0.51 Load	67.19 DegC	332 Mb	2090 Pkt	217 Pkt
1789945802	0.38 Load	66.71 DegC	331 Mb	2078 Pkt	190 Pkt
1789945501	0.4 Load	66.71 DegC	337 Mb	1903 Pkt	229 Pkt
1789945208	0.39 Load	67.19 DegC	329 Mb	2071 Pkt	230 Pkt
1789944902	0.41 Load	67.19 DegC	316 Mb	2032 Pkt	184 Pkt
1789944602	0.28 Load	66.71 DegC	321 Mb	2044 Pkt	170 Pkt
1789944302	0.32 Load	67.19 DegC	323 Mb	1932 Pkt	198 Pkt
1789944002	0.44 Load	66.22 DegC	321 Mb	1966 Pkt	223 Pkt
1789943702	0.45 Load	66.71 DegC	320 Mb	1920 Pkt	165 Pkt
1789943402	0.4 Load	67.19 DegC	321 Mb	1915 Pkt	171 Pkt
1789943102	0.37 Load	67.68 DegC	325 Mb	1831 Pkt	173 Pkt
1789942802	0.42 Load	67.68 DegC	333 Mb	2461 Pkt	193 Pkt
1789942501	0.42 Load	66.71 DegC	330 Mb	2161 Pkt	226 Pkt
1789942202	0.41 Load	67.68 DegC	328 Mb	2000 Pkt	193 Pkt
1789941901	0.39 Load	67.68 DegC	329 Mb	2016 Pkt	241 Pkt
1789941609	0.38 Load	68.17 DegC	323 Mb	1883 Pkt	206 Pkt
1789941302	0.48 Load	68.17 DegC	322 Mb	1775 Pkt	208 Pkt
1789941001	0.63 Load	69.14 DegC	316 Mb	6527 Pkt	1443 Pkt
1789940702	0.45 Load	67.19 DegC	119 Mb	1862 Pkt	176 Pkt
1789940402	0.43 Load	67.19 DegC	119 Mb	1769 Pkt	208 Pkt
1789940102	0.46 Load	67.19 DegC	120 Mb	2045 Pkt	169 Pkt
1789939802	0.4 Load	66.22 DegC	119 Mb	1578 Pkt	215 Pkt
1789939502	0.43 Load	68.17 DegC	124 Mb	1985 Pkt	201 Pkt
1789939202	0.42 Load	68.65 DegC	123 Mb	1987 Pkt	191 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)