SR8NL Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR8NL. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	DgR_1h*	Rx_1h*	Dg_1h*	Eff_1h*	Temp*
1772628108	14.13 Pcnt	260 Pkt	30 Pkt	85 %	26 C
1772627789	13.36 Pcnt	260 Pkt	30 Pkt	87 %	26 C
1772627489	13.53 Pcnt	260 Pkt	30 Pkt	84 %	26 C
1772627189	13.06 Pcnt	260 Pkt	30 Pkt	84 %	26 C
1772626889	13.55 Pcnt	270 Pkt	30 Pkt	84 %	26 C
1772626589	14.38 Pcnt	290 Pkt	40 Pkt	85 %	26 C
1772626289	15.15 Pcnt	290 Pkt	40 Pkt	84 %	26 C
1772625997	15.51 Pcnt	300 Pkt	40 Pkt	84 %	26 C
1772625689	15.95 Pcnt	300 Pkt	40 Pkt	83 %	26 C
1772625389	16.17 Pcnt	300 Pkt	40 Pkt	81 %	26 C
1772625089	16.72 Pcnt	300 Pkt	50 Pkt	80 %	26 C
1772624789	16.72 Pcnt	310 Pkt	50 Pkt	80 %	26 C
1772624489	18.04 Pcnt	310 Pkt	50 Pkt	80 %	26 C
1772624189	17.88 Pcnt	330 Pkt	50 Pkt	81 %	26 C
1772623899	17.77 Pcnt	330 Pkt	50 Pkt	80 %	26 C
1772623589	18.4 Pcnt	330 Pkt	60 Pkt	81 %	26 C
1772623289	19.64 Pcnt	330 Pkt	60 Pkt	79 %	26 C
1772622989	21.49 Pcnt	340 Pkt	70 Pkt	78 %	26 C
1772622689	22.6 Pcnt	350 Pkt	80 Pkt	79 %	26 C
1772622089	24.93 Pcnt	360 Pkt	90 Pkt	77 %	26 C
1772621790	23.77 Pcnt	360 Pkt	80 Pkt	77 %	26 C
1772621489	23.04 Pcnt	360 Pkt	80 Pkt	78 %	26 C
1772621190	22.46 Pcnt	370 Pkt	80 Pkt	78 %	26 C
1772620889	22.38 Pcnt	360 Pkt	80 Pkt	78 %	26 C
1772620590	23.72 Pcnt	370 Pkt	80 Pkt	77 %	26 C

*Used Equation Coefficients:

DgR_1h: 0, 0.001, 0

Rx_1h: 0, 10, 0

Dg_1h: 0, 10, 0

Eff_1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)