BM2MWA-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BM2MWA-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	PM2.5*	PM10*	CO*	O3*
1765556883	16 ug/m3	34 ug/m3	0.32 ppm	33 ppb
1765556285	16 ug/m3	34 ug/m3	0.32 ppm	33 ppb
1765555684	16 ug/m3	34 ug/m3	0.32 ppm	33 ppb
1765555083	19 ug/m3	26 ug/m3	0.32 ppm	35 ppb
1765554483	19 ug/m3	26 ug/m3	0.32 ppm	35 ppb
1765553883	19 ug/m3	26 ug/m3	0.32 ppm	35 ppb
1765553284	19 ug/m3	26 ug/m3	0.32 ppm	35 ppb
1765552086	19 ug/m3	26 ug/m3	0.32 ppm	35 ppb
1765551483	15 ug/m3	32 ug/m3	0.28 ppm	39 ppb
1765550884	15 ug/m3	32 ug/m3	0.28 ppm	39 ppb
1765550283	15 ug/m3	32 ug/m3	0.28 ppm	39 ppb
1765549683	15 ug/m3	32 ug/m3	0.28 ppm	39 ppb
1765549083	15 ug/m3	32 ug/m3	0.28 ppm	39 ppb
1765548483	13 ug/m3	26 ug/m3	0.32 ppm	35 ppb
1765547883	13 ug/m3	26 ug/m3	0.32 ppm	35 ppb
1765547284	13 ug/m3	26 ug/m3	0.32 ppm	35 ppb
1765546684	13 ug/m3	26 ug/m3	0.32 ppm	35 ppb
1765546083	13 ug/m3	26 ug/m3	0.32 ppm	35 ppb
1765544883	13 ug/m3	30 ug/m3	0.32 ppm	35 ppb
1765544285	13 ug/m3	30 ug/m3	0.32 ppm	35 ppb
1765543685	13 ug/m3	30 ug/m3	0.32 ppm	35 ppb
1765543083	13 ug/m3	30 ug/m3	0.32 ppm	35 ppb
1765542483	13 ug/m3	30 ug/m3	0.32 ppm	35 ppb
1765541284	13 ug/m3	30 ug/m3	0.32 ppm	35 ppb
1765540684	17 ug/m3	32 ug/m3	0.38 ppm	31 ppb

*Used Equation Coefficients:

PM2.5: 0, 1, 0

PM10: 0, 1, 0

UV: 0, 1, 0

CO: 0, 0.01, 0

O3: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)