F6KCI-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object F6KCI-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Temp*	DecEff*	Rx10m*	Rx1h*
1776677698	14.33 Volt	25 C	63 Pkt	7 Pkt	30 Pkt
1776677399	14.33 Volt	24.5 C	63 Pkt	6 Pkt	40 Pkt
1776677398	14.33 Volt	24.5 C	63 Pkt	6 Pkt	40 Pkt
1776677098	14.33 Volt	24.5 C	63 Pkt	3 Pkt	40 Pkt
1776676799	14.33 Volt	24.5 C	63 Pkt	0 Pkt	40 Pkt
1776676798	14.33 Volt	24.5 C	63 Pkt	0 Pkt	40 Pkt
1776676498	14.33 Volt	24.5 C	63 Pkt	1 Pkt	50 Pkt
1776676199	14.33 Volt	24 C	63 Pkt	5 Pkt	60 Pkt
1776676198	14.33 Volt	24 C	63 Pkt	5 Pkt	60 Pkt
1776675898	14.33 Volt	24 C	63 Pkt	7 Pkt	60 Pkt
1776675599	14.33 Volt	24 C	63 Pkt	6 Pkt	70 Pkt
1776675598	14.33 Volt	24 C	63 Pkt	6 Pkt	70 Pkt
1776675298	14.33 Volt	24 C	63 Pkt	6 Pkt	80 Pkt
1776674999	14.33 Volt	24 C	63 Pkt	5 Pkt	80 Pkt
1776674998	14.33 Volt	24 C	63 Pkt	5 Pkt	80 Pkt
1776674698	14.33 Volt	24 C	63 Pkt	12 Pkt	80 Pkt
1776674399	14.33 Volt	24 C	63 Pkt	19 Pkt	80 Pkt
1776674399	14.33 Volt	24 C	63 Pkt	19 Pkt	80 Pkt
1776674099	14.33 Volt	24 C	63 Pkt	18 Pkt	70 Pkt
1776673799	14.33 Volt	24 C	63 Pkt	9 Pkt	70 Pkt
1776673799	14.33 Volt	24 C	63 Pkt	9 Pkt	70 Pkt
1776673499	14.33 Volt	24 C	63 Pkt	5 Pkt	60 Pkt
1776673199	14.33 Volt	24 C	63 Pkt	12 Pkt	70 Pkt
1776672898	14.33 Volt	24 C	63 Pkt	18 Pkt	70 Pkt
1776672599	14.33 Volt	24 C	63 Pkt	23 Pkt	70 Pkt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Temp: 0, 0.5, -64

DecEff: 0, 1, 0

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)