HP1AVS-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HP1AVS-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1761849182	14.54 Volt	40 Pkt	10 Pkt	18 Pcnt
1761848582	14.54 Volt	40 Pkt	10 Pkt	18 Pcnt
1761847982	14.54 Volt	30 Pkt	10 Pkt	14 Pcnt
1761847382	14.46 Volt	30 Pkt	0 Pkt	13 Pcnt
1761846782	14.54 Volt	50 Pkt	10 Pkt	20 Pcnt
1761846182	14.54 Volt	80 Pkt	10 Pkt	30 Pcnt
1761844382	14.54 Volt	140 Pkt	20 Pkt	41 Pcnt
1761843782	14.54 Volt	160 Pkt	30 Pkt	42 Pcnt
1761843182	14.54 Volt	160 Pkt	30 Pkt	43 Pcnt
1761842582	14.54 Volt	160 Pkt	30 Pkt	43 Pcnt
1761840782	14.54 Volt	180 Pkt	40 Pkt	43 Pcnt
1761839582	14.54 Volt	210 Pkt	40 Pkt	43 Pcnt
1761838983	14.54 Volt	220 Pkt	50 Pkt	45 Pcnt
1761838383	14.54 Volt	230 Pkt	50 Pkt	46 Pcnt
1761837783	14.54 Volt	220 Pkt	60 Pkt	46 Pcnt
1761837183	14.54 Volt	220 Pkt	60 Pkt	49 Pcnt
1761836583	14.54 Volt	240 Pkt	60 Pkt	52 Pcnt
1761835983	14.54 Volt	220 Pkt	50 Pkt	51 Pcnt
1761835383	14.54 Volt	230 Pkt	50 Pkt	52 Pcnt
1761834783	14.54 Volt	240 Pkt	50 Pkt	51 Pcnt
1761834183	14.54 Volt	230 Pkt	50 Pkt	49 Pcnt
1761833583	14.54 Volt	250 Pkt	60 Pkt	50 Pcnt
1761832983	14.54 Volt	230 Pkt	50 Pkt	49 Pcnt
1761832383	14.54 Volt	230 Pkt	50 Pkt	51 Pcnt
1761831783	14.54 Volt	240 Pkt	60 Pkt	50 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)