DG2MCM-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DG2MCM-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	CO2*	VOC*	PM2.5*	PM10*	PM1.0*
1781524649	200 ppm	49 idx	0 ug	0 ug	0 ug
1781523447	200 ppm	48 idx	0 ug	0 ug	0 ug
1781522246	200 ppm	47 idx	0.01 ug	0.01 ug	0.01 ug
1781521645	200 ppm	47 idx	0.01 ug	0.01 ug	0.01 ug
1781521044	200 ppm	46 idx	0 ug	0 ug	0 ug
1781520443	200 ppm	46 idx	0 ug	0 ug	0 ug
1781519842	200 ppm	45 idx	0.01 ug	0.01 ug	0.01 ug
1781519242	200 ppm	45 idx	0.01 ug	0.01 ug	0.01 ug
1781518050	200 ppm	44 idx	0.01 ug	0.01 ug	0.01 ug
1781516838	200 ppm	43 idx	0.01 ug	0.01 ug	0.01 ug
1781516237	200 ppm	42 idx	0 ug	0 ug	0 ug
1781515637	200 ppm	42 idx	0 ug	0 ug	0 ug
1781515036	200 ppm	42 idx	0.01 ug	0.01 ug	0.01 ug
1781513834	200 ppm	41 idx	0.01 ug	0.01 ug	0.01 ug
1781513233	200 ppm	41 idx	0 ug	0 ug	0 ug
1781512032	200 ppm	40 idx	0.01 ug	0.01 ug	0.01 ug
1781510830	200 ppm	39 idx	0.01 ug	0.01 ug	0.01 ug
1781510229	200 ppm	39 idx	0.01 ug	0.01 ug	0.01 ug
1781509628	200 ppm	39 idx	0 ug	0 ug	0 ug
1781509027	200 ppm	38 idx	0.01 ug	0.01 ug	0.01 ug
1781508427	200 ppm	38 idx	0.01 ug	0.01 ug	0.01 ug
1781507826	200 ppm	38 idx	0.01 ug	0.01 ug	0.01 ug
1781507225	200 ppm	38 idx	0.01 ug	0.01 ug	0.01 ug
1781506624	200 ppm	38 idx	0.01 ug	0.01 ug	0.01 ug
1781505422	200 ppm	37 idx	0.01 ug	0.01 ug	0.01 ug

*Used Equation Coefficients:

CO2: 0, 10, 0

VOC: 0, 1, 0

PM2.5: 0, 0.01, 0

PM10: 0, 0.01, 0

PM1.0: 0, 0.01, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)